Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant


 Shipping cost will vary by dimensions
or weight please call or email for shipping quotes.

  • Page 6 of 11  |  125 Total Products

Part#: TAM32585
TAMIYA German 3ton 4x2 Cargo Truck

★This is a 1/48 scale static model assembly kit. Length: 127mm, width: 48mm.
★The model accurately and concisely captures the functional form that made the German 3ton 4x2 cargo truck such a mainstay.
★Features realistic recreations of ladder frame chassis underside, cabin interior, cargo deck and more.
★Optional headlight cover parts included.
★Comes with driver figure & 2 marking options.
★Includes parts to depict fuel drums & jerry cans, adding further detail to the model.

More Info
Our Price: $27.89
Qty Desired:   Add to Cart

Part#: TAM32548
TAMIYA 1/48 U.S. 2.5 Ton 6x6 Cargo Truck


Our Price: $32.39
Qty Desired:   Add to Cart

Part#: TAM32591

 The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland. 

  1. The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! 

    • 1/48 scale plastic model assembly kit. 
    • The slightly outlandish form of the Sturmtiger is reproduced with accuracy, including the 38cm gun, bulky fighting compartment, lower hull, suspension and link and length assembly type tracks. 
    • The 38cm caliber barrel is depicted by a molded part with rifling detail on the barrel tip. The gun features elevation/depression and traverse movement. 
    • Separately-molded parts are used to recreate the right-rear missile loading crane (which moves), right-front machine gun and more. The kit also includes an optional counterweight part. 
    • Realistic molding includes depictions of cast gun and mantlet surfaces, plus jigsaw hull weld lines. 
    • 1 standing crew figure is included. Note: Marking options are not included in this kit. 

Our Price: $31.49
Qty Desired:   Add to Cart

Part#: TAM35142

 This is a 1/35 scale assembly kit model. It recreates the sd.kfz.7, a successful German support vehicle from WWII. Highly mobile and versatile, it was used for tasks such as transportation of personnel and supplies, evacuation of damaged vehicles, and even hauling towed weapons such as the famed 88mm anti-aircraft gun. The front was equipped with leaf-sprung wheels, while the rear used tracks with torsion bar suspension. 

• 1/35 scale plastic model assembly kit. Length: 200mm. 
• The sturdy form of the semi-track is accurately captured, with depictions of the frame and interleaved track road wheels. Front wheels are steerable. 
• A realistic interior includes details such as driver pedals, instrumentation and more! 
• You can choose whether to assemble the model with hood retracted or deployed. 
• Includes 8 figures in a variety of relaxed poses. 
• Comes with 4 marking options. 

Shipping cost will vary by dimensions or weight please call or email for shipping quotes

Our Price: $31.49
Qty Desired:     Out of Stock

Part#: RMX851970

This is the 1:25 Scale Humvee SnapTite Model Kit by Revell®. 

Shipping cost will vary by dimensions or weight please call or email for shipping quotes.

More Info
Our Price: $14.95
Qty Desired:   Add to Cart

Part#: TAM32502
1/48 Kettenkraftrad w/Cart & Demo Veh

Shipping cost will vary by dimensions or weight please call or email for shipping quotes.                           

  Assemble a German Kettenkraftrad & an Infantry Cart or a Goliath Demolition 
              Vehicle with this 1:48 Scale Plastic Model Kit from             
                 the Tamiya Military Miniature Vehicle Series                 
                          Suitable for Ages 10 & Older.                       
FEATURES: Highly detailed German model replicas in plastic form.              
          Parts also provided to build either an infantry cart or Goliath     
            demolition vehicle for towing cargo.                              
          Loads of armament and equipment parts including fuel drum,          
            infantry anti-tank projector, rifle, ammo box, Jerry can,         
            and handgrenade carrying case.                                    
          Driver figure with realistic details.                               
          Waterslide decals containing 5 different versions.                  
          Illustrated assembly and painting guide.                            

Our Price: $17.19
Qty Desired:   Add to Cart

Part#: TAM35349

 This is a 1/35 scale model recreating the French AMX-13 light tank. The tank employed an oscillating turret, which was made of two halves, with the gun fitted to the upper half. When it fired, the whole upper half recoiled. This design helped facilitate the AMX-13's auto-loader. The tank was produced over the period 1952-1987, and exported to a number of other countries' militaries, in addition to its use by French forces. Different variants were produced, including 75, 90mm gun, 105mm gun and anti-tank missile AMX-13s.



The Tamiya model captures all of the details seen on the actual subject, including rubber tracks which depict realistic rubber pads.


Decals Included


Scale 1/35


Length: 183mm, width: 72mm.


The oscillating turret is beautifully captured with 75mm gun, and features representations of different surface textures.


The model can be assembled with the gun and turret in different elevations.


Realistic belt-type tracks realistically depict rubber pads.


Comes with a commander torso figure for use in the cupola, plus two marking options.



Poly caps are embedded in wheel parts to allow rotation.


Actual Shipping Charges Apply.

Not eligible for flat rate shipping due to package size.




Our Price: $47.99
Qty Desired:   Add to Cart

Part#: TAM35091
German 20mm Flakvierling 38 Kit

This is a 1/35 German 20mm Flakvierling 38 MITSd.Ah.52 from Tamiya

The 2cm Flakvierling 38 was one of the most successful and widely used of
all German antiaircraft guns developed from the 2cm Flak 38 which were single
2cm mounts. In 1940 and enlarged version of the single 2cm Flak 38, featuring
four 2cm guns in a common mount, was designed and put into production. It came
into wide service from 1941 onwards and remained an important item of field
equipment throughout the war.

Plastic pieces attached to sprues and molded in dark gray.
Ready to assemble precision model kit.
Realistic exterior detailing.
Two wheel trailer included, which hooks on to the base.
Machine gun base is designed to move up and down.
Gun base includes gunners seat, magazine case, shield, and machine
Guns included for armory.
Colorful box shows what finished item looks like.
Detailed pictorial instructions.

Our Price: $7.49
Qty Desired:   Add to Cart

Part#: TAM35164
1/35 King Tiger

  This is a 1/35 Plastic German King Tiger Production Turret Tank from Tamiya.
                 This kit is recommended for age 10 and up.                   
     In order to counter the increasing threat of Russian tanks during the    
latter part of the Second World War, Germany began development of a new heavy 
tank in February 1943.  Officially designated the Panzerkampfwagen VI-B Tiger 
II, but better known as the King Tiger, it featured thick armor and a powerful
main gun.  Henschel and Porsche, who had prior experiences in the manufacture 
of heavy tanks, came up with rival prototypes incorporating different turret  
configurations.  After trials, the Henschel design was adopted for production.
The King Tiger carried the Type 43 L71, 88mm high velocity main gun which was 
capable of penetrating 170mm thick armor plate at a distance of 1000 meters.  
FEATURES: Detailed plastic parts attached to sprues and molded in light brown 
            and black.                                                        
          Highly accurate static display model.                               
          Accurately reproduced exterior.                                     
          Authentic 88mm gun with loading breech.                             
          One lifelike commander figure.                                      
          Detailed flexible tracks.                                           
          Thick armor included.                                               
          Machine gun mounted on the front hull section and on the turret.    
          Escape hatch included.                                              
          Vinyl netting for air intake cover.                                 
          Waterslide decals.                                                  
          Detailed pictorial instructions.                                    
INCLUDES: One 1/35 German King Tiger Production Turret Tank                

Our Price: $45.89
Qty Desired:     Out of Stock

Part#: MON857853
MONOGRAM 1/35 Patton M-48A2GA2 Model Tank Kit

 The United States' Vietnam-era battle tank. 
First entering service in the 1950s, the M48 Patton battle tank was widely used by the U.S. Army and U.S. Marine Corps throughout the Vietnam War. Distinguishing features of the "A2" variant included an improved power pack, an upgraded transmission, a redesigned rear plate and improved turret control. Kit features a movable turret, opening and closing hatches, a movable cannon and machine gun, black tank treads, two crew members, six military figures and decals with optional markings.

Skill Level: 2 
Scale: 1/35 
Length: 9-7/8" 
Parts: 152 

Our Price: $20.95
Qty Desired:   Add to Cart

Part#: HSG87911
Hasegawa 1:35 Kübelwagen Type 82 DAK

Hasegawa 1:35 Kübelwagen Type 82 DAK

Shipping cost will vary by dimensions or weight please call or email for shipping quotes.

Our Price: $34.19
Qty Desired:   Add to Cart

Part#: TAM35228
TAMIYA 1/35 US M8 Greyhound Light Armored Car


Our Price: $36.89
Qty Desired:   Add to Cart
  • Page 6 of 11  |  125 Total Products