Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
PLASTIC MODELS : ARMOR AND MILITARY VEHICLES
Shipping cost will vary by dimensions
or weight please call or email for shipping quotes.
- Page 4 of 9 | 103 Total Products
TAMIYA 1/48 German 6x4
Description:
Supporting the German army's mechanized Blitzkrieg during the early stages of WWII was the 6X4 Krupp Protze light truck. Popularly known as the "boxer" due to its air-cooled flat-4 engine, this vehicle provided valuable support for the rapidly moving army by towing artillery pieces and carrying troops and supplies. It's unique sloped engine cover offered excellent forward visibility and the truck was well-liked for its reliability and ease of maintenance.
.jpg)
Our Price: $29.69
TAMIYA 1/35 Russian Heavy Tank JS-2 Model 1944 Chkz
Description:
The Russian Heavy Tank JS-2 was built to overthrow the German Tiger I. Put into production in the latter half of WWII in December 1943, it had a long powerful 122mm gun and superior mobility. From August 1944 the upper part of the hatch was removed from the hull which greatly improved its survivability. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ), and a characteristic of the tank is its one piece cast rounded front. The JS-2 showed great strength in the break through of defensive positions but also in anti-tank battles. The Russian tank JS-2 played a major part which contributed to the victory of the end of the Great War.
About the Model
1/35 Russian Heavy Tank JS-2 Model 1944 ChKZ is a plastic assembly kit.
Length 282mm,
Gun Length 122mm,
Gun comes on a large turret. T
The Tank's front part adds to its presence.
Turret and hull have a realistic cast metal surface affect.
The engine intake grill has etching parts which give a sharp finish.
Two kinds of track are included - belt and assembly types.
Comes with four kinds of markings for Russian, Czechoslovak and Polish tanks.
Our Price: $63.99
1:48 SCALE US M60AIEI TANK MOTORIZED
Description:
This is the 1:48 Scale US M60A1E1 Tank Motorized Finished Model from the Tamiya Advanced Mini Tank Series.
Suitable for Ages 14 & Older.
FEATURES: Type 130 motor
Rubber type tracks
49:1 gear ratio enables the model to climb steep angles of
up to 40°
Powerful running on all terrain
INCLUDES: One plastic model
REQUIRES: 2 AA batteries
SPECS: Scale: 1/48
.jpg)
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Our Price: $26.99
1:35 SCALE US WILLYS MB JEEP
Description:
This is a 1:35 Scale U.S. Willy's MB Jeep Plastic Model Kit from Tamiya.
FEATURES:
Olive green plastic pieces are attached to sprue trees.
Clear pieces included for windshield.
Hood opens to reveal engine.
Includes a driver figure.
Separate frame and floor pan.
Authentic interior.
Details include angle-iron cutter, tow bar, machine gun and jerry can.
Clear pictorial instructions.
MARKING OPTIONS:
- One decal sheet with markings for three vehicles:
- 5th Armored Division 95th Armored Field Artillery Battalion Service Company No. 4, Summer 1944, Normandy.
- ASCZ 3886th Transportation Corps Truck Company No.2 in the "Red Ball Express".
- 7th Armored Division 814th Tank Destroyer Battalion Reconnaissance Company No. 22, January 1945, Belgium.
Paint Colors: Olive Drab, Gunmetal, Chrome Silver, Gold Leaf, Semi-Gloss Black, Flat Black, Flat White, Flat Yellow, Flat Green, Flat Red, Flat Brown, Flat Flesh, Flat Aluminum, Khaki, Flat Earth, Metallic Grey, Buff, Dark Yellow, Red Brown, Light Grey.
INCLUDES:
One 1/35 Scale U.S. Willy's MB Jeep Plastic Model Kit.
REQUIRES:
Assembly
Cement for plastics
Hobby Knife or Sprue Cutter
Tweezers
Water for Waterslide Decals
Paint (See MARKING OPTIONS)
Paint Brushes
Pin Vise or Drill
Glue Tips or Toothpicks
SPECS:
Scale: 1/35
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Our Price: $21.19
1:48 SCALE GERMAN PANZER 38T
Description:
Suitable for Ages 14 & Older.
FEATURES: Highly detailed plastic pieces molded in dark gray
Balanced form with riveted armor plate accurately replicated
Weights give a realistic heavy feel
Assembly type tracks with one-piece straight sections
Parts depict tow cable and tools
Commander torso figure
Waterslide decals
Illustrated instructions
MARKING
OPTIONS: One decal sheet with markings for 2 version:
1) 22nd Panzer Division, Eastern Front, 1942
2) Unit Unknown, Eastern Front, 1942
INCLUDES: One plastic model
REQUIRES: Assembly
Hobby knife
Cement for plastics
Sprue cutters
Paint (German Gray, Red, Gunmetal, Semi-Gloss Black, Flat Black,
Flat White, Flat Flesh, Metallic Gray, Red Brown, Dark
Iron, Rubber Black)
SPECS: Scale: 1/48
Length: 3.85" (98mm)
Width: 1.77" (45mm)
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Our Price: $26.19
1:35 GERMAN PZKFW V PANTHER
Description:
This is a 1:35 Plastic German Panther Kampfwagen V (sd.kfz171) Ausfuhrun9 A WWII Tank from Tamiya.
For ages 10 and over.
The "Panther" medium tank, with its maneuverability, soon became an object of terror to men of the Allied Forces. If put to the question, "Which was the best German tank during the war?" the majority of people, without hesitation would answer the name "Panther." It was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology.
FEATURES: Detailed plastic parts molded in tan and attached to sprues.
Includes two realistic figures - a driver and commander.
Highly detailed static display model.Pliable tracks.
Formidable gun barrel and escape hatch.
Waterslide decals.
Includes detailed and very informative pictorial instructions.
INCLUDES: One 1/35 German Panther World War II Tank with Two Soldier Figures
SPECS:
Length: 7-3/4" (19.4cm) (body of tank without gun)
Width: 3-3/4" (9.6cm)
Scale: 1/35
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Our Price: $21.19
TAMIYA 1/35 JGSDF MCV Type 16
Description:
This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues.
• 1/35 scale plastic model assembly kit. Length: 241mm.
• Refined, angular surfaces have an uncomplicated parts breakdown without sacrificing detail.
• Realistically rendered underside features steerable front wheel pairs.
• Clear parts are used to recreate light lenses and periscope components, plus goggles.
• Rubber tires feature authentic sidewall shapes and tread patterns.
• Comes with 2 figures (one commander and one gunner) for installation in the model.
• 3 decal marking options.
Our Price: $63.99
HOBBY BOSS 1/72 SAM-2 Missle with launcher cabin modle kit
Description:
Development of the V-75 Dvina air defence missile system, designated SA-2 `Guideline' by NATO, started in 1953 as a medium to high SAM system for use against non-manoeuvring targets such as bombers. The system became operational in 1957 when the PVO-Strany formed SA-2 missile regiments of three six rail launcher battalions, with one of the initial deployments near the city of Sverdiovsk. On 1 May 1960 the Sverdiovsk units fired a total of 14 SA-2 missiles against a Lockheed U-2 high altitude reconnaissance aircraft flown by Gary Powers. The SA-2 is a two stage missile with a large solid propellant jettisonable tandem booster stage fitted with four large clipped delta stabilising fins. Towards the mid-section of the missile are four clipped delta-shaped wings with a second set of small fixed fins at the nose and a third in-line set of slightly larger moving control fins at the tail. The SA-2A/B/C models can be distinguished by the two sets of four, flush dielectric strip antennas in front and behind the forward fins.
Item Type: Plastic Model Armor Kit
Model Dimension: Length: 180mm(7") Width: 75mm(3")
Total Plastic Parts: 20+
Total Sprues : 3 sprues
-Newly tooled parts in accurate detail
Our Price: $35.99
1:35 SCALE CROMWELL MK. IV CRUISER TANK
Description:
This is a 1:35 Scale Plastic Cromwell Mk.IV British Cruiser Tank from Tamiya. This kit is recommended for modelers ages 10 and over.
FEATURES: Detailed plastic parts molded in dark green and attached to sprues.
Highly accurate static display model.
Realistically reproduced exterior detailing.
Choice of open or closed hatches.
Detailed flexible tracks.
One lifelike commander figure.
Includes tow cable and mesh netting.
Waterslide decals.
Includes detailed and very informative pictorial instructions.
INCLUDES: One 1/35 Mk.IV British Cruiser Tank with Commander Figure
REQUIRES: Assembly
Cement for plastics
Paint: Dark Green, Gun Metal, Chrome Silver, Gold Leaf, Semi Gloss
Black, Flat Black, Flat White, Flat Green, Flat Flesh, Deep Green,
Flat Earth, Metallic Gray, Buff, Red Brown
Brushes
Modeling Knife
Scissors
Sprue Cutter
File or Emery Board
Tweezers
Pin Vise
SPECS: Length: 6-1/4" (15.7cm) (length of body without gun)
Width: 3-1/4" (8.2cm)
Scale: 1/35
.jpg)
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Our Price: $41.39
TAMIYA 1/35 German Jagdpanzer Iv/70(V)Lang
Description:
This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits.
The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas.
Our Price: $69.99
TAMIYA German Tiger I Early Production
Description:
It was the end of 1942 when a German heavy tank with extra thick armor and a powerful main gun first appeared on the North African front. The new tank, long-desired by the German soldiers who had hard-fought battles against the allies, became known as the Tiger I Ausf. E. Development of the Tiger I began at the end of May 1941. The German Army Weapons Branch ordered the Henschel firm to vie with Porsche in producing a prototype. The first prototypes underwent trials on April 1942. The result of these and subsequent trial showed the superiority of the Henschel vehicle to the Porsche"s, and thus production orders were placed for it. The Henschel"s prototype had thick armor of 100mm at the front and 80mm on both sides, and the main gun was the then most potent, the 8.8cm KwK 36 L/56. The powerplant was Maybach"s HL 210 P45, yielding 650 horsepower. Mass production started already in August 1942 with little alteration from the prototype. Starting from November 1942, air pre-cleaners were added on the rear hull plate. The mantlet was partly strengthened and "S" mine dischargers were fitted on five mounting points around the hull roof beginning from December. Moreover, a loader"s periscope was fitted from January 1943. The Tiger I produced from November 1942 to July 1943 featured these modifications, are referred to as the early production. About 200 units of these early production versions were produced.
.jpg)
Our Price: $46.99
German 20mm Flakvierling 38 Kit
Description:
This is a 1/35 German 20mm Flakvierling 38 MITSd.Ah.52 from Tamiya
The 2cm Flakvierling 38 was one of the most successful and widely used of all German antiaircraft guns developed from the 2cm Flak 38 which were single 2cm mounts. In 1940 and enlarged version of the single 2cm Flak 38, featuring four 2cm guns in a common mount, was designed and put into production. It came into wide service from 1941 onwards and remained an important item of field equipment throughout the war.
Plastic pieces attached to sprues and molded in dark gray.
Ready to assemble precision model kit.
Realistic exterior detailing.
Two wheel trailer included, which hooks on to the base.
Machine gun base is designed to move up and down.
Gun base includes gunners seat, magazine case, shield, and machine guns.
Guns included for armory.
Colorful box shows what finished item looks like.
Detailed pictorial instructions.
Our Price: $7.49
- Page 4 of 9 | 103 Total Products