Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Shipping cost will vary by dimensions
or weight please call or email for shipping quotes.
The F-86, the US Air Force first swept-wing jet fighter, made its initial flight on October 1, 1947. The F -86F 30 were the versions of the F-86 family .She featured with the "6-3" solid-wing. USAAF received the first aircraft the F -86F 30 model on 27 March 1952, and the new F -86F began serving with the 51st Fighter Interceptor Wing.
Scale: 1:72
Length:153 mm Width:156 mm Height:59 mm
Total Parts: 31
3 sprues, wing and fuselage
Decals: 1)334th FS USAF, Pilot Maj.James Jabara, July 1953.
2)South African Air Force No.2 Squadron, Korean War.
The kit consists of 30 parts in light grey plastic, 1 clear for canopy part, slide moulded fuselage, whole moulded wing.
The Me-163 “Komet” was the only operational rocket-powered fighter aircraft during WWII. The Me-163 “A” project code named “Project X” started in 1937 under Dr. Alexander Lippisch. It was made for defense purposes using rocket motors. The first Me-163 flew in 1941. There were fuel consumption and engine efficiency problems, which limited its range. In August 1943, the Me-163 B was developed with further enhancements. Production started in July 1944 and a total of 279 were delivered to the Luftwaffe.
Length: 81.3mm
Wingspan: 128.3mm
Total Parts 17pcs
This is a SBD Dauntless Plastic Model Kit from Revell. Suitable for Ages 10 & Older
FEATURES:
Highly detailed plastic pieces molded in light gray and clear
Operating landing gear, movable machine gun, dive flaps and dropping bomb
Pilot, gunner, deck handler and signal officer figures
Waterslide decals
Illustrated instructions
MARKING OPTIONS:
One Decal Sheet with Markings for 2 Variations:
1) Dauntless from USS Wasp, Guadalcanal, 7 August 1942
2) Dauntless from No. 25 Squadron RNZAF, Seagrove, New Zealand, July 1943
INCLUDES:
One plastic model
SPECS:
Scale: 1/48
Length: 7-3/4" (197mm)
Wingspan: 10" (254mm)
Skill level: 2
Parts: 53
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
This is a 1/72 AH-64 Apache Helicopter SnapTite Plastic Model Kit by Revell.
Suitable for Ages 8 & Up.
FEATURES:
Highly detailed plastic pieces molded in olive drab, black and clear
Easy snap-together assembly...no gluing needed
Detailed cockpit with pilot and co-pilot
Desktop display stand included
Special sticker sheet with one set of authentic markings and a bonus set of custom graphics
Illustrated instructions
INCLUDES:
One plastic mode
SPECS:
Scale: 1/72
Length: 8" (203.2mm)
Skill level: 1
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
This is the 1:48 Scale B-17G Flying Fortress Plastic Model Kit by Revell. Suitable for Ages 10 & Up.
FEATURES:
Highly detailed plastic pieces molded in silver, black and clear
Cockpit and compartments for bombardier, navigator, radio operator and gunners are fully detailed with seats, controls and instrument panels
Gun turrets rotate and the propellers spin
Waterslide decals
Illustrated instructions
MARKING OPTIONS:
One decal sheet with markings for 2 versions:
1) "El Lobo II" s/n 42-32101, 457th BG 748th Sqdn, Nov 1944
2) "Chow Hound" s/n 42-31367, 91st BG 322 Sqdn, 1944
INCLUDES:
One plastic model
SPECS:
Scale: 1/48
Length: 19-3/16" (487.36mm)
Wingspan: 25-15/16" (658.81mm)
Skill level: 2
Parts: 148
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
This is the 1:48 Scale A-10 Warthog Plastic Model Kit from Revell.
Suitable for Ages 10 Older.
FEATURES: Highly detailed plastic pieces molded in light grey and clear
Detailed interior with seated pilot and boarding ladder
ECM pod, cluster bombs, napalm tanks, Maverick missiles and centerline drop tank
Waterslide decals
Illustrated instructions
MARKING OPTIONS: One decal sheet with markings for 2 versions:
1) A-10A Thunderbolt II, 78-0683, "Norris The Playhog", 104th& Tactical Fighter Squadron, 175th Tactical Fighter Group,
Maryland Air National Guard, August 18, 1989
2) A-10A Thunderbolt II, 80-0236, "Let's Roll". Pilot, Major Jill Long 354th Fighter Squadron, 355th Fighter Wing, Davis-Monthan AFB, Arizona
SPECS:
Scale: 1/48
Length: 13" (330mm)
Wingspan: 14-5/8" (371mm)
Skill level: 2
Parts: 167
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
Your model represents the the first Aircraft to reach a speed of Mach 2 which is on display at the National Air and Space Museum in Washington DC.
Easy builder with colorful decals and swivel display base is included.
This classic kit comes molded in white and clear.
Classic artwork.
1/54 Scale.
Measures 11 inches long with a wingspan of 5.5 inches
24 parts
Skill level 2.
The Messerchmitt Bf 109 served from the first to the last day of WWII. This kit depicts the E-3 variant which was used by the Luftwaffe during the invasions of Belgium, the Netherlands, France, as well as the Battle of Britain in the early stages of the war. The slim, angular form of the aircraft is accurately reproduced and the canopy may be assembled in either open or closed position. One pilot figure and three marking options are also included
The Republic Aviation Company F-84 “Thunderjet” was a turbojet fighter-bomber aircraft. Originating as a USAF proposal for a daytime fighter 1944. The F-84 first flew in 1946 and it entered service in 1947.When production of the F-84 was close in 1953, about 4457 had been built, including 6 different versions.
The definitive straight-wing F-84 was the F-84G which entered service in 1951. It was equipped with a more powerful engine that provided fast speed, longer range and armaments capacity. And the ability to carry a single Mark 7 nuclear bomb.The F-84G was retired from USAF in the mid-1960s.
Scale 1:72
Item Type Static Aircraft
Model Brief Length:164 mm(6.5") Wingspan:173 mm(6.9") Height:54 mm(2.125")
Total Parts 54
Total Sprues 5 sprues, wing and fuselage
Decal Scheme 1)F-84G,of 310th FBS,Korea,1952. 2)French Air Force
The kit consists of 53 parts in light grey plastic, 1 clear for canopy part
This is the 1/72 Scale He 51B-1 and Bf 109 E-3 "Legion Condor" Combo
Plastic Model Kit from Hasegawa.
Suitable for Ages 14 & Older.
FEATURES: Highly detailed plastic pieces molded in gray and clear
Limited edition
2 kits included
Detailed cockpit with instrument panel
Waterslide decals
Illustrated instructions
MARKING
OPTIONS: One decal sheet with markings for 4 versions:
1) Luftwaffe Legion Condor J88 Oberleutnant Hannes Trautloft
Code: 2-4 August, 1936
2) Luftwaffe Legion Condor J88 Code: 5 August, 1936
3) Luftwaffe Legion Condor 1./J88 Hauptmann Siebelt Reents
Code: 6-119 Spring 1939
4) Luftwaffe Legion Condor 2./J88 Leutnant Werner Ursinus Code:
6-111 Spring 1939
INCLUDES: One plastic model
REQUIRES: Assembly
Hobby knife (RMXR6909)
Cement for plastics (TESR3512)
Sprue cutters (HCAR0630)
Paint (Black, Silver, RLM70 Black Green, Steel, Flat Black, Red
Brown, Clear Red, Clear Blue, RLM02 Gray, Burnt Iron,
RLM65 Light Blue, RLM66 Black Gray, Tire Black, Wood Brown,
Flesh, Medium Blue, RLM04 Yellow)
SPECS: Scale: 1/72
He 51B-1 Bf 109
Length: 4.48" (114mm) Length: 4.76" (121mm)
Wingspan: 5.94" (151mm) Wingspan: 5.39" (137mm)
Skill level: 3 Skill level: 3
Parts: 31 Parts: 30
COMMENTS: Due to small parts that could cause a choking hazard please keep
away from children 3 years of age and younger
The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series!
• 1/48 scale plastic model assembly kit.
• Can be assembled to recreate many of the extensive Spitfire Mk.I variants.
• Points of interest include superb detailing in areas such as the cockpit and panel lines.
• Separate parts are used to recreate main landing gear and horizontal stabilizers.
• Comes with 1 figure depicting a seated pilot.
• Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more!
• 3 marking options.