Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant


 Shipping cost will vary by dimensions
or weight please call or email for shipping quotes.

  • Page 14 of 14  |  163 Total Products

Part#: TAM61108
TAMIYA 1/48 Mitsubishi A6M3/3A (Zeke)

Following the Zero Model 21 (A6M2), which achieved overwhelming victories against Allied forces in the first half of Pacific War, the summer 1942 saw the introduction of the Model 32 (A6M3) which was powered by a Sakae 21 engine and an 11m wingspan with clipped wingtips. Although top speed increased, its range reduced drastically, therefore the Model 22 (A6M3) was rushed into development in order to correct the Model 32's shortcomings. Overall performance improved as the 12m wingspan and folding wingtips were reintroduced to regain maneuverability and new wing fuel tanks restored range to 2,560km. The Model 22 (A6M3a) which was fitted with long-barreled cannons was also put into production. Deployed mainly to the Solomon Islands from early 1943, Zeroes had fierce battles against U.S. fighters.

★1/48 scale plastic assembly model kit of the Mitsubishi A6M3 Model 22 Zero.
★Length: 190mm, Wingspan: 250mm
★Well-balanced form of the aircraft has been beautifully reproduced.
★Photo-etched parts depict the folded wingtip mechanism
★The A6M3a which was armed with long-barreled cannons can also be assembled.
★You can choose to assemble the cowl flap in either open or closed position. Also, flaps can be depicted in either up or down positions.
★1 seated and 4 standing pilot figures included.
★Comes with 3 kinds of markings including one to depict the aircraft from the 251st Naval Air Group.

Our Price: $51.99
Qty Desired:   Add to Cart

Part#: HBO80364


  • Scale: 1/48
  • Length: 15.15" (385mm)
  • Wingspan: 8.74" (222.2mm)

Our Price: $58.45
Qty Desired:   Add to Cart

Part#: TAM61070
TAMIYA 1/48 Vought F4U-1A Corsair

With its 2,000hp engine and distinctive inverted gull wings, the F4U Corsair was an excellent fighter which served on the frontlines from WWII to the Korean War. This kit depicts the F4U-1A variant which first entered service in the summer of 1943 and was the mount of many famous U.S. Navy and Marine Corps aces. Characteristic features such as the taller seat, longer tailwheel, and improved canopy have all been accurately reproduced, and the wings may even be assembled in folded position. Parts for 1,000lb bombs, drop tanks, and two pilot figures, as well as two marking options are included.


Our Price: $30.59
Qty Desired:   Add to Cart

Part#: RMX855984
REVELL 1/48 F-22 Raptor

The production F-22 was delivered in January of 2003. Originally designed as an air superiority fighter, the F-22 has expanded to the role of a ground attack aircraft. All of the F-22 attack weapons are stored internally which helps it to avoid radar detection. In addition the F-22 has vectored thrusters which give it the ability to virtually fly straight up from a stationary position.

• Full complement of on-board weapons with four separate open weapon storage compartments
• Positional rear thrust deflectors and horizontal stabilizers
• Decal with graphics for all the current F-22 squadron commanders aircraft.
• Molded in light gray and transparent yellow

Skill Level: 5
Scale: 1/48
Wingspan: 7.375"
Length: 10.5"
Height: 2.75
Parts: 118

Our Price: $25.95
Qty Desired:   Add to Cart

Part#: TAM60791
TAMIYA 1/72 F-35B Lightning Ii

This model kit faithfully recreates the bleeding edge airframe of the F-35B Lightning II. The F-35 Lightning II is a state-of-the-art multirole stealth fighter developed by Lockheed Martin for the U.S. military and selected allies. The fighter has three variants: the multi-role fighter F-35A, the short take-off and vertical landing (STOVL) F-35B, and the carrier-capable F-35C. This 1/72 scale model was manufactured by Italeri in 2019 and now joins the Tamiya 1/72 scale War Bird Series with the addition of Tamiya materials and parts.

• 1/72 scale plastic model assembly kit.
• New packaging and instruction manual designed by Tamiya, plus a brand-new Tamiya figure and decals for markings and panel lines.
• Markings are included to depict a choice of two F-35Bs at the U.S. base in Iwakuni, Japan.
• Parts are included to recreate ordnance such as AIM-120 air-to-air missiles, plus a missile troley.
• Choose between open and closed canopy parts.
• Aircraft and ordnance parts are a product of Italeri.

Our Price: $51.99
Qty Desired:   Add to Cart

Part#: ACD12462

The Hawker Typhoon is a British, single-seat, single-engine, metal, semi-shell fighter attack in the low wing structure of the Second World War. Designed in accordance with the requirements set by the British Ministry of Defense in the specification F.18 / 37 of 1937, by the famous designer Sydney Camm. The flight of the prototype took place on February 24, 1940, and the machine entered mass production in 1941. The planes were powered by three variants of the Napier Saber Mk.II engine, ranging from 2180KM to 2260KM. There were five versions of this aircraft. The first two are the fighter F.Mk.IA and F.Mk.Ib, which differ mainly in their on-board weapons. AI Mk.IV and Hawker Typhoon FR Mk IB radar fighter - reconnaissance version. Having dealt with initial design problems, especially engine flaws, the Hawker Typhoon also had great success against V1 shells and German tanks during the fighting in Normandy. In total, over 3,300 copies were built. Technical data (Typhoon F.Mk.IB version): length: 9.73 m, wingspan: 12.67 m, height: 4.66 m, maximum speed: 663 km / h, climb speed: 13.59 m / s, maximum range: 821 km, maximum ceiling 10700 m, armament: fixed - 4 Hispano Mk. II 20mm cannons, suspended - up to 908 kg of bombs, 8 RP-3 missiles.

Our Price: $14.89
Qty Desired:   Add to Cart

Part#: LND432
LINDBERG 1/72 Lindberg Vietnam Era Fighters 2 Pack Scale Mo

 One kit each F4G Phantom and A4D Skyhawk plastic model kits.

Our Price: $28.79
Qty Desired:   Add to Cart
  • Page 14 of 14  |  163 Total Products