Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Produces a tight and consistent knot every time! Knotting tool may be used with the left or right hand to yield professional looking results. Eliminates the need for tweezers and other tools, so creating knots is fast and easy. Handle is high impact plastic; other parts are stainless steel.
The fastest, easiest and most accurate way to insert miniature nails! All you do is insert the nail into the steel tube, position it and give the handle a slight push. The spring loaded mechanism does the rest.
Model builders use this tool for fastening planking on model sailing ships, laying track for model railroads and building wooden model structures. Carpenters use it for fine small joinery.
Hull support for planking, painting and, definitely, building wooden ship models. It allows to hold the model by the keel. This hull planking vise is perfect to work on the boat vertically once you have built the hull: it is completely fixed, without any oscillation. It is undoubtedly an indispensable complement to the ship modelers.
30mm clamp length. It has a pivot point to tilt the helmet and work more comfortably. Mini Clamps fix the support to the edge of the work table.
Bends wooden planking strips with ease and guarantees the correct curvature every time. Place your strip on the wooden form and heat it by moving the plank bender over it several times.
Set includes soldering iron handle with round metal head, plus a wood pattern with two different curves. *Note: Use of this tool outside of the US will require applicable Voltage / Plug conversion adapters for your area / location
This is a Deluxe Ship Modelers Set by Excel. The Ship Modelers Set includes several of the tools necessary for building model ships.
What's Included:
Real wood carrying box
K1 Light Duty Knife Tweezer
K2 Medium Duty Knife Sanding Block and Wedge
K5 Heavy Duty Knife B490 Saw Blade
Awl 4 Assorted Gouges
Plier 3 Assorted Drills
Mitre Box
15 Assorted Blades
Product Specifications
Box dimensions-
Length: 10"
Width: 4.5"
Height: 2.5"
This is the Saw with Handle from Artesania Latina.
FEATURES: Steel fine-tooth saw blade is ideal for cutting wood used in light hobby and craft work.
INCLUDES: Hobby Saw from Artesania Latina
SPECS:Blade Length: 5" (127mm)
Total Length: 9" (229mm) including handle
Laser cut plywood planking clamps eliminate unsightly holes in you blukheads, and you won't waste time screwing in and removing threaded planking clamps. They also hold you planks firmly in place while you glue, drill, measure and taper.
Each clamp is 1" square, and includes a metal screw with wing nut and two 1/16" diameter brass support rods. Assembly required.
Set of 6. Use with bulkheads 3/16" or thicker.
For Positive Secure Gripping of Small Parts for Positioning, Painting, and Getting into Difficult Areas
Equipped with an adjustable spring-loaded shaft and a magnetic tip to hold onto nails before setting.
Includes (1) Nail Setter .125in-.32cm Shaft Diameter
5 - 3" by 4" sheets of wet or dry sand paper.
1 sheet each:150, 200, 320, 400, 600 grit