Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
Part#: THEORYXBUNDLE
THEORY X BUNDLE
Product Details:
Theory X Frame Set:
The Blade® Theory™ X Frame Kits are designed for durability, simplicity, and speed. Constructed exclusively for racing, the assembled kit containing carbon fiber plates, and all recommended equipment has a flying weight of only 400-450g. The airframe features multiple motor mounting holes to fit a variety of motors and the cover plate includes cutouts for a variety of connectors and video transmitter as well as the XT-60. The camera mount is highly adjustable and can angle from 45 to 90 degrees. Advanced FPV pilots and those experienced in building quadcopters from scratch, will appreciate the compact design featuring enough room for all electronics and a GoPro camera. Its true X design provides an excellent feel in the air with more agility, the opportunity to hit top speeds, and the ability to reach the finish line first.
Carbon fiber airframe featuring a solid 4mm main plate provides exceptional durability while maintaining a lightweight profile
Diagonal carbon fiber weave bottom plate for maximum rigidity
Exteme simplicity in design which not only keeps the airframe lightweight overall, it makes building a breeze
Multiple motor mounting holes to fit a variety of motors. 16-19mm motor mount support
The top stack includes convenient cut outs for a variety of video transmitters and cameras
The ingenious top stack was designed to hold a GoPro Hero 3 or 4 with a single strap allowing you to have a race airframe with the ability to run an HD camera
The simple FPV camera mount allows for angles up to 90 degrees allowing you to choose just how fast you want to go
The extremely tough bottom plate provides an XT60 connector cutout for mounting your battery lead to prevent prop strikes in air
The compact frame design is open enough to place electronics easily within a condensed profile
Thrust Motor set:
Overview
2205 – 2050Kv
Lower Kv rating, ideal power performance for 6” propeller setups
Dynamically Balanced
This computer aided balancing ensures that each motor is balanced precisely, offering optimal efficiency and power, every time.
Lightweight
Coming in at only 27 grams each, these lightweight motors give every pilot the power the desire, while keeping weight very minimal.
Easily Removable Can
The can of these motors can be easily removed with a 1.5mm hex wrench, making repairs and cleaning a breeze.
16mm by 19mm Mount
Mounting dimensions fit nearly all standard quadcopter frames between 150 and 250mm , offering a secure fit for any quadcopter with the integrated M3 threading.
M5 post
Standard threading and size for FPV motors, allowing these motors to host a variety of propellers.
Includes
Motor
4 Mounting Screws
Nylon Lock Nut
Thrust BLHA1006 ESC 4 pack:
4 Pack of Thrust ESCs Pre-Flashed with BLHeli Active Dampening and One Shot activated 20A Continuous with 25A (10sec)burst Failsafe protection, over-heat protection and low voltage cutoff 2-4s battery, Opto (no bec) Only 6.8g each Signal Frequency: 20-500Hz PWM Frequency: 18KHz Size: 24.5 x 12.9 x 5.2mm Spektrum FC32 Flight Control Board: Spektrum VX9909 Power Distribution Board: A power distribution board intended to stack with flight controllers that feature a square 30.5mm mounting pattern such as the SPMFC3206, SPMFCF400, SPRF3, Revolt, Naze, CC3D and others Suitable for 250 mini racing drone quadcopters, such as the Blade Theory X, QAV250, tarot 250, ARRIS FPV 250, etc. Weight: 6g Two regulated outputs, 5V and 12V* LED switch (LED power supply is not voltage regulated) The 12 volt power supply will output approximately 1 volt less than the input voltage when the input voltage is less than 13v. This circuit does not boost voltage if the battery input voltage is less than 12v.
USB on right side
PPM/PWM input as through-hole
3.3V, I2C on standard-size headers
Fully pinout compatible with rev5 accessories (OSDoge, etc.)
SBUS Inverter
Compatible with Spektrum diversity and serial receivers
MPU6500
Sonar pads w/resistors added for direct connection
All extra pads (FT, GP, A5) on top, only sonar on bottom
BMP280 barometer
16mbit flash
Our Price: $184.67 Sold By: