Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
This is a 3oz (85g) can of Clear Gloss Lacquer Overcoat Spray Paint from Testors. Special formulation makes this clear Laquer safe to use over Testors brand Enamel paints.
FEATURES:
Can be used for: models, ceramic, plastics, leather, stone, metal, styrofoam, crafts, wax, glass, paper, figures, fabric, wood and touching up purposes.
Not suitable for polyethylene or vinyl.
Contains no lead or harmful CFCs.
Easy-to-hold can.
Does not exceed 95% VOC by weight.
INCLUDES:
One 3oz (85g) Can of Clear Gloss Lacquer Overcoat.
This is a 28ml Jar of Dullcote Lacquer from Testors.
FEATURES:
Crystal-clear, flat overcoat for altering glossy surfaces or protecting decals.
Can be applied over wood, lacquer, enamel, plastic, metal or varnished surfaces.
Glass jar with metal screw-on lid.
INCLUDES:
One 1 28ml Jar of Dullcote Lacquer.
This is a 1-3/4oz Jar of Glosscote Lacquer from Testors.
FEATURES:
Gives a smooth, rich high-gloss finish
Can be applied over wood, lacquer, enamel, plastic, metal or varnished surfaces.
Glass jar with metal screw-on lid.
This is a 3oz (85g) Can of Clear Gloss Finish Spray Paint from Testors Model Master.
FEATURES:
Can be used for: models, ceramic, plastics, leather, stone, metal, styrofoam, crafts, wax, glass, paper, figures, fabric, wood and touching up purposes.
Not suitable for polyethylene or vinyl.
Contains no lead or harmful CFCs.
Can is easily hand-held and paint does not exceed 95% VOC by weight.
INCLUDES: One 3oz (85g) Can of Clear Gloss Finish Spray Paint.
This is the Model Master 1/2oz (14.7ml) Flat Gray Sandable Lacquer Primer from Testors.
FEATURES: Flammable and toxic
Will sand well both wet and dry, but wet sanding products finer results
Sand with very fine sandpaper
Coarse sandpaper will scratch the surface
Recoat, once fully dry - 20 minutes under normal conditions
Primer is a lacquer so it is self dissolving
Builds a bonding coat to both the plastic below and paint above
Can be used under all Testor/Model Master/Floquil and PollyScale Acrylics, Enamels or Lacquers
Can be used on plastic, white metal, metal, resin, contour putty and other fillers
Not recommended for highly porous surfaces
When airbrushing use High Flow Nozzle at 20 PSI or less
INCLUDES: One 1/2oz (14.7ml) Flat Gray Sandable Lacquer Primer
This is the Model Master 1/2oz (14.7ml) Flat Super Fine Gray
Lacquer Primer from Testors.
FEATURES: Flammable and toxic
Will sand well both wet and dry, but wet sanding products finer
results
Sand with very fine sandpaper (TESR1102 or TESR1212 Sanding Films)
Coarse sandpaper will scratch the surface
Recoat, once fully dry - 20 minutes under normal conditions
Primer is a lacquer so it is self dissolving
Builds a bonding coat to both the plastic below and paint above
Can be used under all Testor/Model Master/Floquil and PollyScale
Acrylics, Enamels or Lacquers
Can be used on plastic, white metal, metal, resin, contour putty and
other fillers
Not recommended for highly porous surfaces
When airbrushing use High Flow Nozzle 9306C at 20 PSI or less
INCLUDES: One 1/2oz (14.7ml) Flat Super Fine Gray Lacquer Primer
Colored chrome aerosols are lacquers designed to provide a bright reflective finish on a smooth surface. They have a fast dry time and require several light coats to achieve a reflective finish. Perfect for enhancing the finish of model aircraft and automobiles, as well as craft projects.