Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
APC : FOLDING PROPELLERS
- Page 1 of 2 | 13 Total Products
PROPELLER FOLDING 8 X 4
Description:
These are the 8x4F Folding Propeller Blades from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines).
FEATURES:
Gray composite propeller blades that assemble onto a propeller hub (hub not included, see REQUIRES).
Comes in a bag attached to a header card
INCLUDES:
Two composite propeller blades
One instruction sheet
SPECS:
Diameter: 8" Pitch: 4"
COMMENTS:
Sailplanes have no landing gear, and therefore would break a rigid propeller when the plane came in for a landing. The folding propeller will fold back upon landing.
Our Price: $2.73
PROPELLER FOLDING 9 X 5F
Description:
These are the 9x5F Folding Propeller Blades from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines).
FEATURES:
Gray composite propeller blades that assemble onto a propeller hub (hub not included, see REQUIRES).
Comes in a bag attached to a header card
INCLUDES:
Two composite propeller blades
One instruction sheet
REQUIRES:
45mm prop hub and hardware for assembly, use APCQ4390.
Hand and eye protection when operating propeller.
Our Price: $3.00
PROPELLER FOLDING 10 X 6
Description:
These are the 10x6F Folding Propeller Blades from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines).
FEATURES:
Gray composite propeller blades that assemble onto a propeller hub (hub not included, see REQUIRES).
INCLUDES:
Two composite propeller blades
One instruction sheet
REQUIRES:
45mm prop hub and hardware for assembly, use APCQ4390.
SPECS:
Diameter: 10 inches
Pitch: 6 inches
COMMENTS: Sailplanes have no landing gear, and therefore would break a rigid propeller when the plane came in for a landing. The folding propeller will fold back upon landing.
Our Price: $3.63
PROPELLER FOLDING 11 X 8F
Description:
These are the 11x8F Folding Propeller Blades from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines).
FEATURES:
Gray composite propeller blades that assemble onto a propeller hub (hub not included, see REQUIRES).
Comes in a bag attached to a header card
INCLUDES:
Two composite propeller blades
One instruction sheet
REQUIRES:
45mm prop hub and hardware for assembly, use APCQ4390
Hand and eye protection when operating propeller.
SPECS:
Diameter: 11" Pitch: 8"
COMMENTS:
Sailplanes have no landing gear, and therefore would break a rigid propeller when the plane came in for a landing. The folding propeller will fold back upon landing.
Our Price: $4.11
PROPELLER FOLDING 12 X 8.5F
Description:
This is the APC 12x8.5F Folding composite prop for use with Electric motors. Not for use with gas or glow engines
FEATURES:
Gray composite construction blades that require assembly onto a propeller hub (hub not included)
INCLUDES:
Two composite prop blades
One assembly instruction sheet
REQUIRES:
Prop Hub (SEE COMMENTS)
SPECS:
Length: 12" (304.8mm) Pitch: 8.5"
COMMENTS:
If using a 40mm spinner the individual would need part number APCQ4390
If using a 30mm spinner use part number APCQ4385.
Our Price: $4.32
PROPELLER FOLDING 13 X 10F
Description:
This is the APC 13x10F Folding Composite Prop for use with Electric motors. Not for use with gas or glow engines
FEATURES:
Gray composite construction blades that require assembly onto a propeller hub (hub not included).
INCLUDES:
Two composite prop blades
One assembly instruction sheet
REQUIRES:
Prop Hub (SEE COMMENTS)
Balancing
SPECS: Length: 13"(330.2mm) Pitch: 10"
COMMENTS:
If using a 40mm spinner the individual would need APCQ4390 hub
If using a 30mm spinner use part number APCQ4385.
Our Price: $4.95
PROPELLER FOLDING 13 X 7F
Description:
This is the APC 13x7F Folding Composite Prop for use with Electric motors. Not for use with gas or glow engines
FEATURES:
Gray composite construction blades that require assembly onto a propeller hub (hub not included)
INCLUDES:
Two composite prop blades
One assembly instruction sheet
REQUIRES:
Prop Hub (SEE COMMENTS)
Balancing
SPECS:
Length: 13" (330.2mm) Pitch: 7"
COMMENTS:
If using a 40mm spinner the individual would need APCQ4390
If using a 30mm spinner use part number APCQ4385.
Our Price: $5.34
PROPELLER FOLDING 14 X 10F
Description:
This is the APC 14x10F Folding Composite Prop for use with Electric motors. (Requires Hub)
Hub Diameter: NA
Hub Thickness: See LPFH
Shaft Diameter: See LPFH
Product Weight: 1.06 oz.
Color: GREY
Use LPFH3 Hub (not included)
Our Price: $6.38
HUB ADAPTER FOR FOLDING 35MM PROP
Description:
This is the 35mm Folding Propeller Hub for a 30mm Spinner from Advanced Precision Composites. For use on Electric powered aircraft only (not for gas engines).
FEATURES:
Two-piece, gray composite propeller hub that goes on each side of the folding propeller blades to hold them in place (blades are not included, see REQUIRES)
Hub has molded nut insets for easy tightening
Comes in a bag attached to a header card
INCLUDES:
One composite propeller hub
Two 3x10mm cap head screws
Two 3mm nuts
Two 3mm washers
REQUIRES:
Propeller blade sets (use APCQ4305 through APCQ4360)
2.5mm hex wrench (GPMR8012) to tighten cap head screws
Hand and eye protection when operating propeller
SPECS:
Overall Length: 48mm
Length between blade mounting centers: 35mm
Inner mounting diameter: 8mm
COMMENTS:
See propeller blades for assembly instructions.
Sailplanes have no landing gear, and therefore would break a rigid propeller when the plane came in for a landing. The folding propeller folds back upon landing.
The use of this hub will shorten the overall diameter of the prop by 10mm from the manufacturer's length listing.
Our Price: $5.00
HUB ADAPTER FOR FOLDING 45MM PROP
Description:
This is the 45mm Folding Propeller Hub for a 40mm Spinner from Advanced Precision Composites. For use on Electric powered aircraft only (not for gas engines).
FEATURES:
Two-piece, gray composite propeller hub that goes on each side of the folding propeller blades to hold them in place (blades are not included, see REQUIRES).
Hub has molded nut insets for easy tightening.
Comes in a bag attached to a header card
INCLUDES:
One composite propeller hub
Two 3x10mm cap head screws
Two 3mm nuts
Two 3mm washers
REQUIRES:
Propeller blade sets (use APCQ4305 through APCQ4345).
2.5mm hex wrench to tighten cap head screws.
Hand and eye protection when operating propeller.
SPECS:
Overall Length: 58mm
Length between blade mounting centers: 45mm
Inner mounting diameter: 8mm
COMMENTS:
See propeller blades for assembly instructions.
Sailplanes have no landing gear, and therefore would break a rigid propeller when the plane came in for a landing. The folding propeller folds back upon landing.
Our Price: $5.00
HUB ADAPTER FOR FOLDING 50MM PROP
Description:
This is the 55mm Folding Propeller Hub for a 45mm Spinner from Advanced Precision Composites. For use on Electric powered aircraft only (not for gas engines).
FEATURES:
Two-piece, gray composite propeller hub that goes on each side of the folding propeller blades to hold them in place (blades are not included, see REQUIRES)
Hub has molded nut insets for easy tightening
Comes in a bag attached to a header card
INCLUDES:
One composite propeller hub
Two 3x10mm cap head screws
Two 3mm nuts
Two 3mm washers
REQUIRES:
Propeller blade sets (use APCQ4305 through APCQ4360)
2.5mm hex wrench (GPMR8012) to tighten cap head screws
Hand and eye protection when operating propeller
SPECS:
Overall Length: 63mm
Length between blade mounting centers: 50mm
Inner mounting diameter: 8mm
COMMENTS:
See propeller blades for assembly instructions.
Our Price: $5.00
- Page 1 of 2 | 13 Total Products