Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

0 products in cart | Total: $0.00

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant


  • Page 1 of 3  |  27 Total Products

Part#: PASR0075
PAASCHE Regulator and Filter

Regulator & Moisture Trap for D500, D200, DA300 & DA400 compressors. The R-75 is a low pressure regulator with a 100 psi gauge and moisture drain. This regulator gives control of operating pressure as well as assisting in furnishing clean, dry and regulated air.

Maximum primary air pressure: 135 psi.

Temperature Range: 40 to 125 F.

Accurate regulation between 2 and 60 psi.

Our Price: $31.00
Qty Desired:     Out of Stock

Part#: BAD105-1

  This is the Patriot 105 Airbrush from Badger. 

Single needle/nozzle for spraying all mediums including inks, dyes, watercolors, properly reduced acrylics, enamels, lacquers, and airbrush-ready colors including SpectraTex, Air-Opaque, Air-Tex,  Modelflex, and Totally Tattoo.
Single needle/nozzle sprays pencil thin lines to 3"(76mm) spray  pattern
Easy cleaning and maintenance
Patented handle design produces the fastest needle release on the market
Finger tight assembly tolerances
Excellent for multiple applications, for novice to advanced airbrush users 
One year limited warranty against all manufacturing defects of  material and/or factory workmanship 

Badger Patriot 105 Airbrush with instruction sheet 

Air Regulated Compressor or Propellant (BADR1150, BADR1160)  
Air Pressure: 15 to 50 p.s.i.           

Our Price: $99.99
Qty Desired:     Out of Stock

Part#: BAD360-1

The Universal® Model 360 is the only airbrush capable of performing in a gravity feed as well as a bottom feed mode. Never before has one airbrush provided so much versatility. It is two airbrushes in one.

Set contains 360Universal® airbrush with all purpose nozzle/needle, attachable jar, additional jar with cover, trigger pad, protective cap, and instruction manual in a plastic case

360° front end rotation to allow for either gravity or bottom feed usage
Single nozzle/needle sprays from pencil lines to 3˝ (76mm) spray pattern
Single size nozzle/needle design for spraying all materials, acrylics to watercolors, inks to lacquers, Air-Opaque™, Air-Tex,® MODELflex,® Totally Tattoo® and Totally Tan™ airbrush paints
Easy access needle assembly
Finger tight assembly tolerances
Correct weight apportionment balance system
Ultra comfort, ergonomically correct trigger cushion
Lifetime warranty on labor, rotational seal and PTFE seals
Fine replacement parts now available

Our Price: $136.99
Qty Desired:     Out of Stock

Part#: BAD350-4
BADGER 350 Airbrush Set with 3 Heads (F, M, H)

The 350® is an external mix, bottom feed, single action airbrush. Air and paint mix outside the airbrush, creating a larger, coarser "dot" pattern and providing a heavier spray volume. The 350® is superb for base coating, stenciling, stipling, touch up projects, etc. An excellent choice for beginning students, hobbyists, ceramists, and automotive painters. This model sprays high viscosity materials such as ceramic glazes and stains, and hobby enamels with ease. It is also effectively used with properly reduced acrylics, inks, dyes, watercolors, acrylic lacquers, enamels.

  • Includes all 3 nozzles, Fine, Medium and Heavy for maximum versatility of paint choice.
  • Color cup and one-piece jar adaptor taper-fit for quick color changes
  • Nozzles/needles made of precision manufactured metals
  • Solvent and chemical resistant
  • Sprays higher viscosity materials
  • Excellent for more volumous spray projects

Our Price: $119.99
Qty Desired:   Add to Cart

Part#: BAD20020
Badger Air-Brush Co 200-20 Fine Detail Single-Action Airbrus

The 200-20 Set contains the 200-20 fine detail airbrush with .50mm nozzle will produce a 1/32-inch line to 2 1/2-inch (63 millimeter). 1/4 ounce. color cup, jar w/ adaptor, extra jar, wrench, cap, instruction manual in plastic storage case

Artists and graphic painters appreciate the Model 200-20, designed with the PPS paint flow adjusting system, enabling recurring accuracy in spray pattern and line control.

The Model 200 will spray inks, dyes, watercolors, gouaches, properly reduced acrylics, fabric paints, modeling paints, automotive lacquers and enamels, most ceramic stains and glazes, Air-Tex, SpectraTex, Air-Opaque and MODELflex airbrush colors

Non-slip, one-piece trigger; for beginners and intermediate airbrushers; Color cup and jar adaptor for quick color change; Easy maintenance and cleaning, Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear.

Our Price: $79.99
Qty Desired:     Out of Stock

Part#: BAD122
BADGER Regdab Airbrush Lubricant, 1 Oz Bottle

 Badger "Regdab Needle Juice" enhances smooth trigger action and eliminates needle friction due to dry paint build up.

Our Price: $6.70
Qty Desired:   Add to Cart

Part#: BAD50-2011
BADGER 10 Foot Braided Hose with Female End

Durable rubber air hose in braided fiber "housing". Swivel connection for airbrush at one end and varying air source connector fitting at opposite end.
10ft. (3.05m) length

Our Price: $28.99
Qty Desired:   Add to Cart

Part#: BAD50-205
BADGER Jar Adaptor Cap

These caps allow you to "cap off" prefilled bottles of paint or solvent for convenient storage.
Fit most brand siphon bottles for airbrushs.
6 per package.

Our Price: $1.50
Qty Desired:   Add to Cart

Part#: BAD40-051F

Use with Badger Air-Brush Co Model 105, 155, 200NH, 360 and 3155 airbrushes
Precision manufactured utilizing a durable metal alloy
Converts your airbrush to a fine assembly
Creates a spray pattern from a pencil line to 2-inch (51 millimeter)
Badger Air-Brush parts are proudly made in America

More Info
Our Price: $29.50
Qty Desired:   Add to Cart

Part#: BADT602
BADGER Head O-ring for Vega & OMNI

Our Price: $3.45
Qty Desired:   Add to Cart

Part#: BADT86K
THAYER & CHANDLER (BADGER) VEGA 1000 Airbrush with Hose

Conceptualized in concert with leading artists - In 1992 Thayer & Chandler revolutionized the airbrush industry by engineering a high volume airbrush with a lighter, more comfortable, streamlined design and an innovative, anti-clogging, cut-away handle feature.

Engineered for easy maintenance, all Vegaª parts are quickly changeable for little down time. Self-centering, self-sealing fluid tips come in 3 sizes to handle any airbrush application. The rocker lever is attached to the needle tube for easy disassembly, and eliminating loose or shifting parts falling out of the airbrush. A larger contoured one-piece trigger slips easily into place, no more fumbling with two-piece triggers. Each Vegaª airbrush is tested in actual use, assuring you the best in performance.

• Self-centering, self-sealing fluid tip
• Anti-clog, anodized aluminum, cut-away handle
• Attached back lever for easy assembly
• Spring adjuster customizes lever tension
• Stainless steel needles*
• Heavy nickel chrome plating
• Vega airbrushes are tested in actual use before they leave the factory
• Adaptable for use with all major brand airbrush jars and color cups
• One year limited warranty on all components
• Lifetime labor warranty
• Needle identification: Fine - no line, Medium - three lines and Heavy - five lines

Includes 5 foot braided hose with 1/4" compressor fitting on one end and Badger fitting on other end.

Our Price: $132.99
Qty Desired:   Add to Cart

Part#: BADT70

The Model T70 Set contains OmniMatrix dual action, internal mix airbrush with rotational dual feed.

Color cup/adapter stem, protective cap, wrench, and instruction manual in a convenient storage case.
Will spray a 2X hairline to a 1-inch spray pattern.

The unique dual (gravity/bottom) feed feature of the versatile Omni Matrix airbrush is enjoyed by a variety of airbrush enthusiasts, crafters, hobbyists, cake decorators, artists, taxidermists.
Gravity for small detail/siphon feed for larger coverage.

Ideal for spraying all mediums inks, dyes, watercolors, properly reduced acrylics, enamels, lacquer, glazes, Air-Opaque, AirTex, SpectraTex, MODELFlex, and Totally Tattoo colors.

Badger and Thayer & Chandler Airbrushes are American Made.
One year warranty on mfg defects with a lifetime warranty on any factory labor repairs.

Our Price: $125.99
Qty Desired:   Add to Cart
  • Page 1 of 3  |  27 Total Products