Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
New frome Triple J Fabrications
the Nelson/Jett engine stand a must have for serious piyon racers.
designed for holding your engine during engine tuning and bearing replacement
Nelson/Jett BEARING TOOL
New frome Triple J Fabrications
the Nelson/Jett Bearing Tool a must have for serious piyon racers.
designed for replacing Bearings in the Jett/Nelson engines
Fits standard glow plugs.
Long reach, almost 3".
Great for RC cars and 4 cycle glow engines in cowls.
New frome Triple J Fabrications
The qwick change Glow Plug Wrench alows you to chang out a bad plug in seconds!
10mm
New from Triple J Fabrications
The qwick change Glow Plug Wrench allows you to change out a bad plug in seconds!
3/8"
Pitch (inches) 8.9
Propeller Diameter (in.) 8.8
Hub Diameter 0.90 in.
Hub Thickness 0.60 in.
Shaft Diameter 1/4 in.
Product Weight 0.92 oz.
Color
GREY
New frome Triple J Fabrications
The qwick change Glow Plug Wrench alows you to chang out a bad plug in seconds!
5/16 inch
Pitch: 9 inches
Propeller Diameter: 8.8 inches
Hub Diameter: 0.90 inches
Hub Thickness: 0.56 inches
Shaft Diameter: 1/4 inches
Product Weight: 0.92 oz.
Color: GREY
Pitch (inches) 8.9
Propeller Diameter (in.) 8.8
Hub Diameter 0.90 in.
Hub Thickness 0.60 in.
Shaft Diameter 1/4 in.
Product Weight 0.92 oz.
Color GREY