Central Hobbies

Orders Only: 1-800-723-5937           Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST

 
0 products in cart | Total: $0.00
 
 

Central Hobbies
1401 Central Avenue
Billings, MT 59102

We Gladly Accept:
Central Hobbies is secured by Comodo SSL
as well as
PayPal Verified Merchant

MODEL ROCKETS : LAUNCH PADS/ LAUNCH CONTROLS/ ACCESSORIES


  • Page 1 of 2  |  16 Total Products





Part#: EST2228
ESTES Ultimate™ Tube Marking Guide
Description:

A heavy-duty, 18 in. long precision plastic marking tool that makes drawing accurate fin or launch lug lines the length of any size body tube a breeze!


Our Price: $11.99
Qty Desired:   Add to Cart
 



Part#: EST2303
ESTES STARTECH™ Starters
Description:

The new StarTech starters stay true to the design of the original, with one key addition. The small nichrome wire, the one that heats the propellant at launch, has been dipped in a specially crafted chemical compound that reacts with the heat of the wire to create a large burst of heat and pressure that ensures ignition. Never misfire again! Includes 6 starters.


Our Price: $6.99
Qty Desired:   Add to Cart
 



Part#: EST2227
ESTES Tube Marking Guide
Description:

The tube marking guide is an easy way to mark your fin and launch lug placement. The marking guide is a must for any rocket builder!


Our Price: $13.99
Qty Desired:   Add to Cart
 



Part#: EST2243
ESTES 1/8″ Two-Piece Launch Rod
Description:

1/8 inch diameter by 32 inches long. Ideal replacement rod for Porta Pad II.
Also works great when used as an alignment tool on model rockets that require two launch lugs.
 


Our Price: $8.99
Qty Desired:   Add to Cart
 



Part#: EST2232
ESTES AltiTrak
Description:

How high did it really go? Next time, measure it with this easy to use device. Follow the rocket in the sights to apogee, release the trigger to lock the reading. It is that easy. Use two Altitraks for greater accuracy.


Our Price: $23.99
Qty Desired:   Add to Cart
 



Part#: EST2222
Porta-Pad® II Launch Pad and Electron Beam® Launch Control
Description:

Porta-Pad® II Launch Pad and Electron Beam® Launch Controller

The Launch Pad comes complete with blast deflector, standoff stem, two-piece 1/8 in. launch rod and launch rod cap. Launch direction may be adjusted 30 degrees from vertical and can accommodate a 3/16 in (5 mm) Maxi Launch Rod - sold separately. Minor assembly required and no glue or tools are needed.

The Launch Controller comes fully assembled with 17 ft (5.2 m) of cable and requires 4 new 1.5V 'AA' alkaline batteries - sold separately. A GREAT Controller for launching all mini, standard (A-c) and D powered rockets.

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, starters and recovery wadding are required - sold separately-unless otherwise specified



Our Price: $39.99
Qty Desired:   Add to Cart
 



Part#: EST2220
ESTES Electron Beam Launch Controller
Description:

 Launch controller comes complete with safety key and 17 ft (5.2 m) of cable. A GREAT Controller for launching mini and standard (A-C) engine powered rockets. 

Requires four new high quality 'AA' alkaline batteries - not included.


Our Price: $29.99
Qty Desired:   Add to Cart
 



Part#: EST2244
ESTES 3/16″ TWO-PIECE MAXI™ LAUNCH ROD
Description:

This 3/16″ (5 mm) diameter two-piece launch rod is necessary for most of our larger rockets that are powered by C11, D and E Engines.
Can be used in the 2215 Porta-Pad II or 2238 Porta-Pad E launch pad.
Also works great when used as an alignment tool on model rockets that require two launch lugs.


Our Price: $14.99
Qty Desired:   Add to Cart
 



Part#: EST2264
12 in. Printed Parachute
Description:

 This 12 in. (30.5 cm) parachute is preassembled and ready to use on model rockets that require a 12 in. parachute.


Our Price: $4.99
Qty Desired:   Add to Cart
 



Part#: EST2271
24 in. Printed Parachute
Description:

 This 24 in. (61 cm) parachute is preassembled and ready to use on model rockets that require a 24 in. parachute.

 


Our Price: $6.99
Qty Desired:   Add to Cart
 



Part#: EST2262
6 in. Printed Parachute
Description:

 This 6 in. (15.2 cm) parachute is preassembled and ready to use on model rockets that require a smaller parachute.


Our Price: $1.59
Qty Desired:   Add to Cart
 



Part#: EST2267
18 in. Printed Parachute
Description:

 This 18 in. (46 cm) parachute is preassembled and ready to use on model rockets that require a 18 in. (46 cm) parachute.

 


Our Price: $3.99
Qty Desired:   Add to Cart
 
  • Page 1 of 2  |  16 Total Products