Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
PINECAR WOOD CARS : PINECAR CARS & PARTS
- Page 2 of 4 | 42 Total Products
PINECAR Alignment Tool
Description:
This is an Alignment Tool from Pine Car.
FEATURES:
This tool may be used with any gravity race car whose overall maximum measurements are 7" long, 2-3/4" wide, and require 3/8" clearance from track to lowest point on car body.
Perform seven checks:
- Check axle slots for alignment
- Check clearance between wheel and car body
- Prevent camber
- Check toe-in and toe-out
- Length
- Width
- Clearance.
INCLUDES:
One Alignment Tool
Our Price: $5.79
PINECAR Racing Wheel
Description:
This is a Set of Four Racing Wheels from Pine Car.
FEATURES:
Racing Wheels are the same high quality wheels and axles found in Pine Car deluxe and basic car kits.
Includes four wheels, two axles and five hubcaps.
Black plastic construction.
INCLUDES:
Four Racing Wheels
SPECS:
Diameter: 1-1/8" (29mm)
Our Price: $5.99
PINECAR Windshield Kit
Description:
This is a Windshield Kit Custom Parts Set from Pine Car.
FEATURES:
Custom Parts such as drivers, engines and pipes, rollbars and more can easily transform a simple car project into an exciting work of pride!
Extremely versatile and can be used on many different styles of cars.
Cast metal parts.
Includes driver, seatback, steering wheel, rollbar, black vinyl and four patterns.
INCLUDES:
One Windshield Kit Custom Parts Set
REQUIRES:
Cement
Our Price: $3.59
PINECAR Round Weight 2 oz
Description:
This is a Set of 2oz Round Weights from Pine Car.
FEATURES:
The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on race day.
Drill 3/8" (9.5mm) diameter hole in the car and install the weight.
Carded packaging with instructions on rear.
INCLUDES:
One Set of 2oz Round Weights
REQUIRES:
Pliers
SPECS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)
Our Price: $4.49
PINECAR Tapered Weight 2 oz
Description:
This is a Set of 2oz Tapered Weights from Pine Car.
FEATURES:
The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on
race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear.
INCLUDES:
One Set of 2oz Tapered Weights
REQUIRES:
Pliers
SPECS:
Length: 4-1/4" (108mm)
Width: 1-1/4 to 5/8" (32-16mm)
Weight: 2oz (56.7g)
Our Price: $5.49
PINECAR Strip Weight 2 oz
Description:
This is a Set of 2oz Strip Weights from Pine Car.
FEATURES:
The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear.
INCLUDES:
One Set of 2oz Strip Weights
REQUIRES:
Pliers
SPECS:
Length: 3-1/2" (98mm)
Width: 5/8" (16mm)
Weight: 2oz (56.7g)
Our Price: $4.49
PINECAR Bar Weight 2 oz
Description:
This is a Set of 2oz Bar Weights from Pine Car.
FEATURES:
The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear.
INCLUDES:
One Set of 2oz Bar Weights
REQUIRES:
Pliers
SPECS:
Length: 4-1/4" (108mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)
Our Price: $4.49
PINECAR Axle Placement Guide
Description:
This is the Axle Placement Guide from PineCar by Woodland Scenics.
FEATURES:
Use with axle holes or slots to ensure accurate wheel spacing and axle nail alignment
Correctly and straightly install axles into slots and establish proper gap between wheels and body
Instructions included
INCLUDES:
One axle placement guide
One allen wrench
COMMENTS:
Due to small parts that could cause a choking hazard please keep away from children 3 years of age and younger
Our Price: $16.99
PINECAR Axle & Polishing Kit
Description:
This is An Axles and Polishing Kit by PineCar.
FEATURES:
Polished axles reduce friction and increase speed.
B.S.A. type axles.
Instructions printed on package.
INCLUDES:
5 Axle Nails
1 Sheet of Wet or Dry Sandpaper
.5oz Pumice Powder
REQUIRES:
Electric Drill
Vise with Padded Jaws
Small Fine Cut File
Magnifying Glass
Scissors
Ruler
Water
Cloth (3/8" x 4")
COMMENTS:
Always wear eye protection.
Our Price: $3.99
PINECAR Straight Tracker
Description:
This is the Straight Tracker from PineCar by Woodland Scenics.
FEATURES:
Accurately bend axles to force straight tracking
Adjust steering by bending axles 1.5° or 2.5°
Use to track car straight or to apply rail riding method
Must use with Axle Shaper (PINY4612)
Instructions included
INCLUDES:
One straight tracker
Our Price: $16.99
Pinecar Wedge
Description:
Create Your Own Original Car Design with the Basic Wedge from PineCar.
FEATURES:
Carefully selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will design and build your derby car.
Pre-cut, plain wedge shaped block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.
INCLUDES:
One Wedge Wood Block Body
Our Price: $3.79
Pinecar Block
Description:
Create Your Own Original Car Design with the Basic Block from PineCar.
FEATURES:
Carefully selected, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will design and build your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.
INCLUDES:
One Wood Block Body
Our Price: $4.49
- Page 2 of 4 | 42 Total Products