Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
For increasing the prop shaft hole in props to 7mm, 8mm, 10mm, 12mm. Includes protective plastic case.
Dubro Fuel Can Cap Fittings
Dubro Fuel Can Fittings help to provide quick and easy fuel pump hook-ups.
These universal cap fittings and nylon filter will fit and 1-1/4" or larger
fuel can cap. The 8-piece set includes(4)1/4" nuts, 3 top quality brass
fittings and a fuel filter. These fittings requires large size fuel tubing.
Does not include the fuel cap. You must drill holes in the cap that came on
your fuel can. Requires drilling only 2 holes....very simple!
This is a 4-step prop reamer for standard size prop shafts(American measures).
This is NOT for metric shafts. It is used to enlarge the hole on the prop because most of the time the hole is too small to fit the engine. This is the best way to do it because it will not split the prop and will keep the hole perfectly centered
It will ream holes with a diameter of 3/16, 1/4, 5/16, and 3/8 inch
Fill your Robart Large Air Tank in about 1 minute
Programmable pressure shut off with LED display and light
Rechargeable with built in battery (USB and DC/Car charging ability)
Includes the following:
Air Pump
Fill tube
Adapter fitting
18 inches of air line
USB charge cable
DC/Car charge cord
Take the hassle out of fueling your bird with Hangar 9's Recoil Fuel Tubing. This translucent recoil tubing connects directly to your gas can fitting and fuel pump. Perfect for gas or glow fuel, it's expandable to 6 feet and recoils back to 1 foot.
This is a Styrofoam Super Stand Model Support from Robart.
FEATURES
Injection Molded Styrofoam Construction.
Useful for Building, Painting, Repairs or Storage of Your Model.
Two Trays in the Base for Tools or Small Parts.
INCLUDES
One Rectangle Foam Base
Two Foam Uprights
This is the new and improved version of Robart's pit stand. The new version is sturdier and more resistant to damage. Fits "any size airplane from small gliders to giant warbirds.
FEATURES
Foam ends that support the aircraft or boat
"Feet" that actually contact the item in the stand, these feet are covered by rubber pads to ensure no damage occurs and are also adjustable to fit any sized model
Plastic tubes to connect the two foam endpieces, these allow the end pieces to slide in or out to accomodate any length model
INCLUDES
Two foam end pieces
Two plastic tubes (corregated for strength)
Four rubber pads for the feet
Four foam feet
SPECIFICATIONS
Height: 11"
Length (adjustable): 0"-30"
Width: 11"
COMMENTS
Due to the foam construction, excessive contact with fuel should be avoided. Should any parts break, replacement parts are available from Robart directly for a nominal charge.
New frome Triple J Fabrications
The qwick change Glow Plug Wrench alows you to chang out a bad plug in seconds!
10mm
New from Triple J Fabrications
The qwick change Glow Plug Wrench allows you to change out a bad plug in seconds!
3/8"
For reaming the prop shaft hole in props to 5/16 or 3/8 inch.
Includes protective plastic case
This is a 4-way wrench that is handy to have in any field box. It has four of the most popular sizes used in modeling: 5/16", 3/8", 7/16", and 1/2" and will also fit 8,10,11,12mm sizes.
FEATURES
Built-in glow plug storage for three glow plugs.
Wrench storage klip for mounting on field box or workbench.
INCLUDES
(1) 4-way socket wrench
(1) Storage klip
(2) Storage klip mounting screws
SPECIFICATIONS
-socket depth 3/8"
-socket sizes: 5/16", 3/8", 7/16", 1/2", 8mm, 10mm, 11mm, 12mm
-storage klip 1 3/4"length, 5/8"width, 3/4"height
This is a 4-way wrench that is handy to have in any field box. It has four of
the most popular sizes used in modeling: 5/16", 3/8", 7/16", and 1/2" and will
also fit 8,10,11,12mm sizes.
FEATURES
EXTRA LONG glow plug socket for deep heatsink heads.
Built-in glow plug storage for three glow plugs.
Wrench storage klip for mounting on field box or workbench.
INCLUDES
(1) 4-way socket wrench
(1) Storage klip
(2) Storage klip mounting screws
SPECIFICATIONS
-socket depth 3/8"
-socket sizes: 5/16", 3/8", 7/16", 1/2", 8mm, 10mm, 11mm, 12mm
-storage klip 1 3/4"length, 5/8"width, 3/4"height