Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
The Head Lock Remote has the same Twist-Lock design of the Head Locks, but is low profile to fit under cowls or canopies. It has a remote glow plug connector, allowing the pilot to power the glow plug from any point on the model (away from the prop). The plug can be powered by a Head Lock or Head Lite. Mounting bracket and connectors included.
The Dynamite® Ni-MH metered glow driver 2600mAh Ni-MH & Charger
Included 2600mAh Sub-C Ni-MH battery
Sure-Lock™ Glow Plug Attachment for hands-free charging
Contoured Comfort Grip Finger Clip
Convenient 250mAh wall charger
The Head Lock Remote has the same Twist-Lock design of the Head Locks, but is low profile to fit under cowls or canopies. It has a remote glow plug connector, allowing the pilot to power the glow plug from any point on the model (away from the prop). The plug can be powered by a Head Lock or Head Lite. Mounting bracket and connectors included.
RCATS Lithium Glow Driver with User-selectable startup delay feature (~5 seconds)
More InfoThe Dynamite® Ni-MH metered glow driver was designed to make glow ignition easy and affordable. Includes a USB style charge for added flexibility and versatility. The unit comes anodized for durability and great looks. Includes a meter which makes it easy to see if glow plug is good or if the unit needs re-charging.
This Kwik Klip II is a standard glow plug clip, used to heat up the glow plug when starting glow engines.
FEATURES
This Kwik Klip comes with a 30" cord for those long reaches.
Also it has a shaft size of 1".
The Kwik Klip can also be used with a power panel, to do this you will need
banana plugs.
New from Triple J Fabrications
The qwick change Glow Plug Wrench allows you to change out a bad plug in seconds!
3/8"
This is a locking glow plug clip. It attaches to a glow plug with a clipping action to hold it on securely. This is to be used with a 1.5V battery or a power panel.
Spring loaded clip is made of Chrome Plated Steel and Red plastic.
Clip length: 3-1/2"
Wire length: 29"
Handy rubber cap to prevent shorting.
Will hook to most glow plugs but not glow heads (e.g., Cox engines)
This is a Remote Safety Ignitor (Remote Glow Ignitor) for In-Cowl Engines.
This provides an external glow driver socket that is wired directly
to the actual glow plug and grounded to one engine head bolt.
This is a Remote Safety Ignitor (Remote Glow Ignitor) for In-Cowl Engines.
This provides an external glow driver socket that is wired directly
to the actual glow plug and grounded to one engine head bolt.
Designed to clip onto glow plugs that are recessed far down into the cylinder heads.
Can be used on any single cylinder engine.
For use with any car, helicopter, plane or boat where the glow plug is in a hard to reach spot or is close to a propellor.
Dust cover is attached with a pin and rotates left or right, opening so glow driver can be inserted into the recessed socket.
Ignitor socket is made of black plastic.
Mounting Hole For External Socket: 11/16"
Wire Length: 23-1/2"
The Dynamite® Ni-MH metered glow driver was designed to make glow ignition easy and affordable. The unit comes anodized for durability and great looks.
Included 2600mAh Sub-C Ni-MH battery
Sure-Lock™ Glow Plug Attachment for hands-free charging
Contoured Comfort Grip Finger Clip
Glow Driver with NiMH battery only. Does Not come with a charger.