SET OF FOUR FIRM RIBBED ISODAMP GROMMETS FROM GATOR R/C.
RETAIL PRICE $6.95
Our Price: $5.25
SOFT-N-SAFE MOUNT BY GATOR Description:
FOR 120 FOUR STROKES
RETAIL PRICE $37.95
Our Price: $25.00
SIG X-LARGE GLASS-FILLED ENGINE MOUNTS Description:
FOR .61 - .90 2 STROKE ENGINES AND USABLE WITH .70 - 1.40 4 STROKE GLOW ENGINES.
Molded from a new, high-tech, glass-filled plastic, and braced with webs, these mounts are far stronger than typical glass-filled nylon types. The real beauty of these mounts is that they don't require tapping. Simply drill holes to clear your engine mounting bolts, then fasten your engine to the mounts using 3/4" long bolts and aircraft lock nuts (4-40 or 6-32 depending on engine, not included). Bolts and blind nuts are included for bolting the mounts to your firewall.
Our Price: $3.75
HANGER 9 Ultra Engine Mount Description:
There are literally hundreds of engine mounts on the market today. But even with all there is to choose from, it's still a challenge to find exactly the right one for some kits.
Enter the Hangar 9 Ultra Engine Mount. The Ultra Engine Mount can be used with a wide variety of engine sizes; from .58 2-strokes all the way up to big 1.50 four-strokes. With this mounting system, there is no drilling and tapping necessary. Twin, slotted-aluminum beams hold the engine in place, but allow adjustment of the fore/aft position of the engine simply by loosening the mounting bolts.
The Firewall sides are 2-7/16 inches (62mm) tall, hole spacing is 1-15/16 inches (50mm) center to center.
Overall length is 3-15/16 inches (100mm) and beam length is 3-7/16 inches (88mm) long.
Our Price: $9.49
J'TEC W120 ALUMINUM ENGINE MOUNT FOR WEBRA 120 Description:
Aluminum engin mount for Webra 120 2 strock engine. May fit other engines as well.
Distance between beams: 1.9 inchs
Beam Length: 2.4 inchs
Center to center hole spacing along beam: 1.17 inch
From back hole to end of flat toward backplate of mount: .75 inch
Front firewall to back hole: 1.385 inch
Discontinued Clearance Item
Regular price was $22.00
Clearance Price: $10.00 !!!!!
Our Price: $10.00
SIG Large Glass Filled Engine Mount Description:
FOR .19 - .61 SIZE GLOW ENGINES
3 INCHES LONG
1-7/8 INCHES TALL
Our Price: $3.53
Bridi EM-1 Plastic Engine Mount Description:
FOR GLOW ENGINES IN THE .05 CU IN SIZE RANGE
ROUND BACK PLATE
OVERALL LENGTH 1-3/16 INCH
USABLE BEAM LENGTH 7/8 INCH
WIDTH BETWEEN BEAMS 5/8 INCH
Our Price: $2.59
Sig Small Glass Filled Engine Mount Description:
FOR .09 - .19 SIZE GLOW ENGINES
2-1/4 INCHES LONG
1-5/8 INCHES TALL
Our Price: $3.59
ZNL Plastic Engine Mount Description: