Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
JR/Hitec/Airtronics Z kits come with 5 plastic housings and 5 sets of sockets.
Crimper for this can be found here.
Single piece adapter with an IC3 device connector and a T-Plug connector. It allows you to to adapt a battery with either an IC3 or EC3 plug to connect to a Deans compatible or T-Plug connector on an ESC, though Spektrum™ Smart capabilities will not be functional with the adapter.
Ultra Plug, High Temp, Male (2pk), 12-16 Gauge
This is the Dynamite Balancing Adapter Board for any balance charger that use XH compatible balance ports. This adapter allows you to balance from 2S to 6S batteries via one harness. This is a great adapter when you have packs with different cell counts and eliminates the need to purchase individual harnesses for each battery type.
Deans Pigtails are the easiest way to get your battery pack plugged in right. Two five inch lengths of Deans Ultra Wire are factory soldered to the #1 rated Ultra Plug using high performance silver solder.
NOTE: W.S. deans no longer uses red plastic for their connectors. The unit you receive may have White or Black High Temp connector.
Package of 3 male and 3 female 4mm bullet connectors.
Includes 6 Black pieces of heatshrink rather than the one red in the picture.
New High Temp Plastic Housing with Heat Shrink Tubing
2 per package
Key Features:
Capable of more than 120A continuous current with 10-awg wire
Ergonomically pleasing and easy to grip
Protected to avoid shorting and reverse polarity
Superior technology suited to today's advanced applications
Designed with convenience and reliability in mind