Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
BALL BEARING
For 2.5mm or 4-40 push rods
BALL BEARING
For 3mm and 6-32 push rods
Pre-threaded for 2mm push rod
Ceramic ball for ultra smooth motion
2mm through bolt to servo arm
Fits 2.5mm or 4-40 push rods
2mm through bolt for servo arm
Connects straight rods to servo arms or other controls. Features an adjustable 0-80 nut to hold it onto the control/servo arm (instead of a push-on washer) and an exclusive brass locking tab to lock the set screw in place. For 2-56 and 4-40 sized rods.
This 5-piece set will attach your 1/16" pushrod wire to almost any servo arm, bellcrank, control horn or throttle rod.
Includes:
1- ball with 2-56 thread
1- threaded brass coupler (3/4" long with 3/8" 2-56 thread for up to 1/16" diameter pushrod wire)
1- self-threading nylon socket (ball cup)
1- nut and 1- washer
Requires:
1/16" pushrod wire
Solder to connect coupler to pushrod
This is an Aileron Connector & Dual Take Off Ball Link. This is a Two-Way nylon Socket which means that rods can be threaded into both ends. Nylon, brass, & steel construction
INCLUDES
One ball link (ball cup) (self-threading, White nylon) (1"long)
One ball stud (threaded for a 0-80 (1/16") nut) (Black steel)
(.375" total height, .236" ball height w/ .152" diameter ball)
Two threaded coupler (3/4" long w/ 3/8"x2-56 threads) (brass)
One 1/16" nut for ball stud
REQUIREMENTS
Soldering the coupler onto rod
3/16" wrench to install the ball
5/32" wrench for the nut
This is a Strip Aileron Ball Link Fully adjustable aileron hook-up. No play, no binding, super precision. Eliminates differential throw.
More InfoThese are 2-56 Ball Link Sockets also called Ball Cups
SPECIFICATIONS
Length: .625" (5/8") (15.8mm) end to end
Dubro Ball Links Aileron Horn Wire
This set is used to connect your strip aileron horn wires to your aileron
pushrods. Also used as dual take off connectors.
INCLUDES
2- steel horn wire ball links for 3/32" horn wire
2- self-threading nylon sockets (ball cups)
2- brass threaded couplers (3/4" long with 3/8" 2-56 threads
for up to .072" diameter wire)
2- 4-40 round head screws (for standard screwdriver)
This is a 1/16" Threaded Ball Link
FEATURES
Nylon, brass, & steel construction
INCLUDES
One ball link (ball cup) (self-threading, white nylon) (.638" long)
One ball stud (threaded for a 0-80 (1/16") nut) (black steel)
(.375" total height, .236" ball height w/ .152" diameter ball)
One threaded coupler (3/4" long w/ 3/8"x2-56 threads) (brass)
One 1/16" nut for ball stud
REQUIREMENTS
Soldering the coupler onto rod
3/16" wrench to install the ball
5/32" wrench for the nut
SPECIFICATIONS
See "Includes" above
These are Threaded Couplers for .072" Wire or Cable.
FEATURES
Brass construction
2-56 threads
INCLUDES
Five couplers
REQUIREMENTS
Soldering to the wire or cable.
SPECIFICATIONS
Length: 1.25" (total) .725" (thread)
Diameter: .072" ID .125" OD
COMMENTS
Designed for use with Dubro Kwik-Links and ball links