Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
CONTROL LINKAGE : CONTROL HORNS
- Page 3 of 4 | 42 Total Products
SIG NYLON AILERON CONNECTORS
Description:
These self-threading aileron connectors are molded out of super tough nylon. 4-40 threads. Package of 4.
Our Price: $1.24
Dubro Control Horns T-Style Large (2)
Description:
These are Super Strong Large Scale T-Style Nylon Control Horns.
FEATURES
Black nylon construction
Four adjustment positions
Four mounting holes
INCLUDES
Two control horns 1-7/16" long
Two mounting back plates 7/8"x13/16"x1/16"
Eight 3/32x1" cap head screws
REQUIREMENTS
3/32" allen wrench for the cap head screws
These large scale T-Style control hors were aerodynamically designed with large scale airplanes in mind.
Our Price: $3.85
Dubro Adjustable Control Horn (2)
Description:
This is an Adjustable Control Horn. Recommended for .60 powered aircraft and smaller.
FEATURES
Polished steel construction.
INCLUDES
Two steel threaded couplers.
REQUIREMENTS
Threading onto rod.
SPECIFICATIONS
Length: 36.5mm (1.438")
Diameter: 3.5mm (.138")
Length of thread: 18.5mm (.731")
Thread size: 4-40
COMMENTS
This coupler will join two 4-40 rods, with a male connection on one end and a female on the other.
Our Price: $3.55
Dubro Heavy Duty Horn Bracket 6-32
Description:
These are Heavy Duty EZ Adjust Horn Brackets for 6-32 Threads
FEATURES:
Nylon construction
INCLUDES:
Four horn brackets
REQUIRES:
A control horn with 6-32 threads
Our Price: $2.10
Dubro Horn Bracket 4-40 3/32
Description:
These are 3/32" EZ Adjust Horn Brackets for 4-40 Threads
FEATURES: Nylon construction
INCLUDES: Four horn brackets
REQUIRES: A control horn with 4-40 threads
Our Price: $2.14
Dubro E/Z Mount Steering Arm DUB664
Description:
E/Z Mount Steerng Arm by Dubro with the shock absorbing design
E/Z Mount Steerng Arm by Dubro with the shock absorbing design.
PACKAGE INCLUDES: 1- T Spool (black plastic) 1- Cap Screw 2- Rubber Washers 1- Rubber Tubing 1- Steering Arm (black plastic)
SPECS:
Cap Screw: 3x18mm Rubber Washer: 10mm Rubber Tubing: Length: 19mm Outside Diameter: 7mm Inside Diameter: 4mm
COMMENTS: Cable and pushrod steering linkage can be run through bottom of fuselage or through front of fuselage. Instructions are listed on the inside of the headercard.
Our Price: $2.30
Dubro Servo Arms Super-Strength Futaba J Long (8)
Description:
For those requiring a really heavy duty servo arm, the Dubro
"Super Strength" arms will fit the bill.
Features: Black composite plastic servo arms.
Includes: 2 each of short, medium and long servo arms the extend in
one direction from the servo center. Also has two long
arms the extend in two opposing directions from the servo center.
Specs: Short : Mounting holes at: 12, 15 and 18mm. Total length-23mm.
Medium: Mounting holes at: 15, 19, 22 and 25mm. Total length-30mm.
Long : Mounting holes at: 23, 25, 28 and 32mm. Total length-36mm.
Dual : Mounting holes at: 15, 19, 23 and 26mm. Total length-28mm.
* All measurements are from the center of the arm.
* The dual is only from one side to center. Actual overall length- 56mm.
* Fits the FUTABA servos with splined output shafts.
Our Price: $16.42
Dubro Control Horns Super Strength T-Style (2)
Description:
These are Super Strong T-Style Nylon Control Horns. (Same horns as DUB237 with different mounting screws)
FEATURES:
Nylon construction
INCLUDES:
Two control horns w/5 adjusting holes and 2 mounting holes (1-1/8" long {tall})
Two mounting plates w/2 mounting holes (1/2"x1/2")
Four 2-56x1/2" cap head screws
REQUIREMENTS:
A 5/64" allen wrench for the screws
Our Price: $2.73
Dubro Control Horn Micro (2)
Description:
This is the Micro-Control Horn From Du-Bro for the Park Flyers
FEATURES:
These are made of Plastic.
Three Holes for Adjustment
INCLUDES:
Two (2) Control Horns
SPECIFICATIONS:
Length: 1/2" (13mm)
Width: 1/4" (6mm)
Height: 1/16"(3mm)
For use on the Park Flyer or a Small Indoor Airplane!
Our Price: $1.93
Dubro Micro Bellcrank System
Description:
This is a 90° Micro Bellcrank System from Du-Bro.
FEATURES:
Nylon and brass construction
INCLUDES:
One 90° (L-shape) nylon arm
One brass grommet (used as a pivot bushing for the nylon arm)
One slotted round head self-tapping screw (2.2x10mm)
One flat washer 6.3 x 3.1 x 0.53mm (ODxIDxThickness)
SPECIFICATIONS:
Length: 20.48mm each L portion of the arm
Width: 5.3mm widest point of the arm
Height: 3.25mm the pivot portion of the arm
1.12mm arm portion
Diameter: (If applicable)
Our Price: $2.05
Dubro Heavy-Duty Control Horn System (2)
Description:
This is a Heavy Duty Control Horn System for large and giant scale models.
FEATURES:
Black nylon plastic.
Aluminum pins and nuts.
Adjustable length and height
INCLUDES:
Two 8-32 socket head cap screw
Two large nylon washers
Two aluminum pins
Two small cotter pins
Two threaded and tapered nuts
Two nylon arms
Two clevises (swivel clevis style) for 4-40 rods
SPECIFICATIONS:
Clevis
Length: 30mm (1.18")
Width: 9.7mm (0.38")
Height: 9.16mm (0.36")
Our Price: $14.07
Dubro Heavy-Duty Control Horn .40-.91
Description:
This a Dubro Heavy Duty Control Horn for a .40-.91 size plane.
FEATURES:
Heavy duty construction
6-32x1 1/2" socket head cap screw used to secure horn
INCLUDES:
Two control horns
Instructions on inside of header card
SPECIFICATIONS:
Horn Length: 1" (25.4mm)
Diameter of base: 5/8" (16mm)
Our Price: $10.54
- Page 3 of 4 | 42 Total Products