Information and Orders: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
CONTROL LINKAGE : BALL LINKS, CLEVISES, E-Z CONNECTORS
- Page 2 of 7 | 80 Total Products
CONTROL HORN CLEVIS 2.5MM
Description:
BALL BEARING
For 2.5mm or 4-40 push rods
Our Price: $14.99
CONTROL HORN CLEVIS 3MM
Description:
BALL BEARING
For 3mm and 6-32 push rods
Our Price: $14.99
DUAL AXIS ROD ENDS 2MM
Description:
Pre-threaded for 2mm push rod
Ceramic ball for ultra smooth motion
2mm through bolt to servo arm
Our Price: $5.98
ROD END BALL BEARING 2.5MM
Description:
Fits 2.5mm or 4-40 push rods
2mm through bolt for servo arm
Our Price: $3.08
SULLIVAN Heavy Duty Pushrod Connector
Description:
Connects straight rods to servo arms or other controls. Features an adjustable 0-80 nut to hold it onto the control/servo arm (instead of a push-on washer) and an exclusive brass locking tab to lock the set screw in place. For 2-56 and 4-40 sized rods.
Our Price: $3.98
Dubro Ball Link Threaded w/Washer 1/16
Description:
This 5-piece set will attach your 1/16" pushrod wire to almost any servo arm, bellcrank, control horn or throttle rod.
Includes:
1- ball with 2-56 thread
1- threaded brass coupler (3/4" long with 3/8" 2-56 thread for up to 1/16" diameter pushrod wire)
1- self-threading nylon socket (ball cup)
1- nut and 1- washer
Requires:
1/16" pushrod wire
Solder to connect coupler to pushrod
Our Price: $3.03
Dubro Aileron Connector & Dual Take Off Ball Link
Description:
This is an Aileron Connector & Dual Take Off Ball Link. This is a Two-Way nylon Socket which means that rods can be threaded into both ends. Nylon, brass, & steel construction
INCLUDES
One ball link (ball cup) (self-threading, White nylon) (1"long)
One ball stud (threaded for a 0-80 (1/16") nut) (Black steel)
(.375" total height, .236" ball height w/ .152" diameter ball)
Two threaded coupler (3/4" long w/ 3/8"x2-56 threads) (brass)
One 1/16" nut for ball stud
REQUIREMENTS
Soldering the coupler onto rod
3/16" wrench to install the ball
5/32" wrench for the nut
Our Price: $2.65
Dubro Ball Link Strip Aileron
Description:
This is a Strip Aileron Ball Link Fully adjustable aileron hook-up. No play, no binding, super precision. Eliminates differential throw.
One left pre-bent aileron control wire w/pre-installed hinge
One right pre-bent aileron control wire w/pre-installed hinge
Two 2-56x6" aileron pushrods (3/4" threaded on one end)
Two ball links w/screws & ball cups (see DUBQ1700 for specs)
Two 2-56 Solder Kwik-Links w/link guards (see DUBQ1675 for specs)
One instruction card
Our Price: $9.36
Dubro Ball Link Sockets (4)
Description:
These are 2-56 Ball Link Sockets also called Ball Cups
- White nylon construction
- INCLUDES
- Four ball link sockets
- REQUIREMENTS
- 2-56 threaded rod
SPECIFICATIONS
Length: .625" (5/8") (15.8mm) end to end
Our Price: $2.25
Dubro Ball Links Aileron Horn Wire (2)
Description:
This set is used to connect your strip aileron horn wires to your aileron pushrods. Also used as dual take off connectors.
Includes:
2- steel horn wire ball links for 3/32" horn wire
2- self-threading nylon sockets (ball cups)
2- brass threaded couplers (3/4" long with 3/8" 2-56 threads for up to .072" diameter wire)
2- 4-40 round head screws (for standard screwdriver)
Our Price: $5.03
Dubro Ball Link Threaded 1/16
Description:
This is a 1/16" Threaded Ball Link
FEATURES
Nylon, brass, & steel construction
INCLUDES
One ball link (ball cup) (self-threading, white nylon) (.638" long)
One ball stud (threaded for a 0-80 (1/16") nut) (black steel)
(.375" total height, .236" ball height w/ .152" diameter ball)
One threaded coupler (3/4" long w/ 3/8"x2-56 threads) (brass)
One 1/16" nut for ball stud
REQUIREMENTS
Soldering the coupler onto rod
3/16" wrench to install the ball
5/32" wrench for the nut
SPECIFICATIONS
See "Includes" above
Our Price: $3.05
Dubro Threaded Coupler Large 2-56 (5)
Description:
These are Threaded Couplers for .072" Wire or Cable.
FEATURES
Brass construction
2-56 threads
INCLUDES
Five couplers
REQUIREMENTS
Soldering to the wire or cable.
SPECIFICATIONS
Length: 1.25" (total) .725" (thread)
Diameter: .072" ID .125" OD
COMMENTS
Designed for use with Dubro Kwik-Links and ball links
Our Price: $4.51
- Page 2 of 7 | 80 Total Products