Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
This is an Electric Fuel Pump from Hangar 9.
Works from a 12V power source
Alligator style battery clips
Includes filtered fuel can clunk
Built-in hooks allow for handy fuel can attachment
Fill-off-empty switch positions
For use with glow fuel only
Built-in hooks attach easily to most fuel cans. Prewired with insulated alligator battery clips to connect to a 12V power supply. Includes filtered clunk.
Highly durable composite construction
Includes fuel filter, fueling nozzle, fuel line and mounting screws
Overdrive gear system for fast fueling
For use with glow fuel only
Features durable composite construction and overdrive gear system for fast fueling. Includes fuel filter, fueling nozzle, fuel line and mounting screws.
CARRIER FOR FUEL JUG AND PUMP
Color may be different than picture.
This is a Filtered Fueler with Feed Cap from Sullivan.
FEATURES: Conveniently screws directly onto one gallon fuel jugs.
Self stores when not in use.
Filter tip can be used with Sullivan Filler Valves or directly into tank tubing.
38mm cap fits standard one gallon fuel jugs.
1/8" probe fits most tubing and Sullivan Fuel Filler Valves.
Includes four feet of 5/32" ID flexible silicone tubing and a double screen Crap Trap filter with aluminum ends.
INCLUDES: One Filtered Fueler with Feed Cap.
From Sullivan, this is a cap for one gallon fuel bottles
Designed to work on most one gallon fuel bottles with standard 38mm cap
Compatible with all fuels (glow, gas, diesel, and smoke fluid)
One nylon insert with fill and vent line nipples
One cap liner
One fuel line weight ("klunk")
Four wire twist ties for fuel line
COMMENTS: Does not include fuel line.
This Device is for Airplane Modelers that have their Engines and Fuel Lines in "hard to get at" Places such as Cowlings.
One-Piece Valve Assembly installed into Airplane with
Convenient Fueling Probe for Refueling.
One Pre-Assembled Fueling Valve (Gas Fuel or Smoke Oil)
One Fueling Probe (DUB339)
One Knurled Nut w/Serrated Washer
Overall length (front to back): 13/16" (20mm)
Mounting nut diameter (what is seen on outside of cowl): 1/4"
Hole size (drilled through cowl): 3/8"
Length inside cowling: 1/2"
Will require drilling 3/8" hole for acceptance of valve assembly.
NOTE: This will ONLY work with Gas Fuel or Smoke Oil.
For Glow Fueler, use DUB650.
Dubro Replacement Fueling Probes
Make refueling faster and neater with these probes, you don't have to disconnect the fuel line at the carburetor when refueling. Just plug the fueling probe into the valve, and the fuel line to the carburetor is automatically shut off. When fueling probe is removed, fuel flows through valve to carb.
Fill a tank directly from a 1-gallon fuel container by mounting this fitting into the cap.
Includes probe that works with the Kwik-Filling Valve.
One Nylon Nut
One Filling Cap
One Kwik-Fill Probe
Installing into cap by drilling a 1/2" diameter hole in the center.