Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
TRAINS : HO GAUGE TRACK, SWITCHES & ACCESSORIES
- Page 3 of 4 | 40 Total Products
ATLAS HO-CODE 100 REMOTE SNAP SWITCH LEFT
Description:
These switches have a remote control switch machine attached so you can wire the switch to be "thrown" (changing the direction of the rail), from your control panel, rather than from the switch itself. Comes with a 1/3 18" radius section, making the curved leg equal to an 18" radius section. To add a passing track and siding, simply replace a 9" straight section. When replacing an 18' radius curved section with an Atlas Snap-Switch, add a 1 1/2" straight section to the opposite side.
- 18" Radius Snap-Switches
- Designed for above or under-table switch machine
- Plastic Frog (cannot be powered)
- Cut-outs for rail joiners
Our Price: $32.95
ATLAS HO Rail Joiners
Description:
ATLAS Nickel Silver code 100/83 rail joiners.
Pack of 48
Our Price: $5.50
BACHMANN Remote Turnout - Left (HO Scale)
Description:
Steel alloy track with black roadbed; 1/card
This is the basic turnout of the E-Z Track® system with a turnout radius matching 18” Radius Curved Track.
If you have enough room, you may consider purchasing larger E-Z Track® turnouts to allow for smoother transitions between tracks during switching operations, and to accommodate locomotives and rolling stock with longer wheel bases.
Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation.
Our Price: $35.99
BACHMANN Hayes Bumper (HO Scale)
Description:
Steel alloy track with black roadbed; 2/card
These bumpers properly finish the ends of your track spurs.
Our Price: $16.99
BACHMANN HO 35.5 inch Radius 18 Degree Curved E-Z TRACK
Description:
Five pieces of track make up one-quarter (90 degrees) of a 71" diameter circle (a full circle is 360 degrees). In general, 35.5" Radius Curved Track is best used to make wide, sweeping railroad curves to accomodate longer locomotives and rolling stock, and permit mainline operation at higher speeds. It can be placed on the outside of 33.25" radius curved track for excellent double-track mainline realism, and it can also be used to quickly lay track on a behind-the-scenes helix.
Our Price: $27.99
BACHMANN 18 inch Terminal Rerailer with Wire (HO Scale)
Description:
Nickel silver track with gray roadbed; 1/card
The terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is also designed to correct derailments that sometimes occur during normal railroad operations. Rerailers are installed after difficult sections of track (turnouts, crossings, “S” curves, etc.) where derailments may occur.
Also available in the E-Z Track® system is an 18” Radius Curved Rerailer if you need a rerailer but do not need to make power connections.
Our Price: $8.50
BACHMANN Remote Switch RH E-Z Track HO
Description:
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
This is an HO Scale E-Z Track System Right Hand Remote Switch by Bachmann.
FEATURES: Switches cars from one track to another
Black plastic with steel alloy rails
Operates on floors, tables, and carpets
No screws, nails, or special tools needed for assembly
Snaps together and stays together
Quick, easy assembly
Includes red and green connecting wires and black plastic switch
Carded packaging
INCLUDES: One HO Scale E-Z Track System Right Hand Remote Switch
REQUIRES: HO Scale Train Equipment
Adult Supervision
SPECS: Scale: HO (1:87)
Length: 10-3/4" (273mm)
Width: 3-1/2" (88mm)
Height: 1/2" (13mm)
Our Price: $35.99
BACHMAN HO 22 inch Radius Curved E-Z TRACK
Description:
22” radius curved track is best used to make relatively wide railroad curves.
This track accommodates longer locomotives and rolling stock, and permits mainline operation at higher speeds.
It can be placed on the outside of 18” radius curved E-Z Track® for double-track mainline realism.
Four pieces of track make up one-quarter (90 degrees) of a 44” diameter circle (a full circle is 360 degrees).
Also available in bulk.
Our Price: $20.99
CHAMP HO GUAGE CP RAIL CABOOSE DECALS
Description:
CLEARANCE
COMPARE TO E-BAYS PRICE OF $2.07
OUR PRICE JUST $1.00
NEW OLD STOCK
Our Price: $1.00
30 Degree Crossing (HO Scale)
Description:
Steel alloy track with black roadbed; 1 per card
In addition to many other uses, the 30 Degree Crossing is the centerpiece of a basic “Figure 8” track configuration.
To make a Figure 8, you also need 21 pieces of 18” Radius Curved Track (Steel Alloy) and 1 piece 18” Radius Curved Terminal Rerailer (Steel Alloy).
Our Price: $13.99
HO GUAGE CANADIAN PACIFIC CABOOSE
Description:
CLEARANCE
COMPARE TO E-BAYS PRICE OF $7.19
OUR PRICE JUST $2.00
NEW OLD STOCK
Our Price: $2.00
ATLAS HO SWITCH CONTROLLER
Description:
Atlas220Controller
This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc. Couples with #215 Selectors.
Our Price: $6.50
- Page 3 of 4 | 40 Total Products