Orders Only: 1-800-723-5937 Information: 1-406-259-9004
Hours: Mon - Sat 10-6 MST
Central Hobbies
1401 Central Avenue
Billings, MT 59102
We Gladly Accept:
as well as
TRAINS : HO/N SCALE SETS AND ACCESSORIES
- Page 3 of 4 | 48 Total Products
9 inch Straight Rerailer (HO Scale)
Description:
Steel alloy track with black roadbed; 2/card
The rerailer is designed to correct derailments that sometimes occur during normal railroad operations. It can also be used to help properly align wheels on the track when assembling a train for operation. If you want to use the rerailer to help place cars on the track, you should install it so that it is easily accessible. Otherwise, it should be installed after a difficult section of track (turnout, crossing, “S” curve, etc.) where derailments may occur.
Also available in the E-Z Track® system is a 9” Straight Terminal Rerailer (Steel Alloy) if you need a rerailer and a power connection.
Our Price: $7.49
ATLAS HO/N TRACK NAILS
Description:
Blackened, round head, 1/2" long, steel track nails
Approx. 500 nails per pack
Our Price: $5.95
BACHMAN E-Z TRACK N GAUGE NICKEL SILVER 11-1/4 INCH CURVE
Description:
Our Price: $13.99
9 inch Straight Terminal Rerailer with Wire (HO Scale)
Description:
Nickel silver track and gray roadbed; 1/card
The terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is also designed to correct derailments that sometimes occur during normal railroad operations. It can also be used to help properly align wheels on the track when first assembling a train for operation. If you want to use the rerailer to help place cars on the track, you should install it so that it is easily accessible. Otherwise, it should be installed after a difficult section of track (turnout, crossing, “S” curve, etc.) where derailments may occur.
Also available in the E-Z Track® system is a 9” Straight Rerailer if you need a rerailer but do not need to make power connections.
Our Price: $10.99
Remote Turnout - Left (HO Scale)
Description:
Steel alloy track with black roadbed; 1/card
This is the basic turnout of the E-Z Track® system with a turnout radius matching 18” Radius Curved Track.
If you have enough room, you may consider purchasing larger E-Z Track® turnouts to allow for smoother transitions between tracks during switching operations, and to accommodate locomotives and rolling stock with longer wheel bases.
Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation.
Our Price: $33.99
Hayes Bumper (HO Scale)
Description:
Steel alloy track with black roadbed; 2/card
These bumpers properly finish the ends of your track spurs.
Our Price: $15.50
35.5 inch Radius 18 Degree Curved (HO Scale)
Description:
Five pieces of track make up one-quarter (90 degrees) of a 71" diameter circle (a full circle is 360 degrees). In general, 35.5" Radius Curved Track is best used to make wide, sweeping railroad curves to accomodate longer locomotives and rolling stock, and permit mainline operation at higher speeds. It can be placed on the outside of 33.25" radius curved track for excellent double-track mainline realism, and it can also be used to quickly lay track on a behind-the-scenes helix.
Our Price: $25.99
18 inch Terminal Rerailer with Wire (HO Scale)
Description:
Nickel silver track with gray roadbed; 1/card
The terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is also designed to correct derailments that sometimes occur during normal railroad operations. Rerailers are installed after difficult sections of track (turnouts, crossings, “S” curves, etc.) where derailments may occur.
Also available in the E-Z Track® system is an 18” Radius Curved Rerailer if you need a rerailer but do not need to make power connections.
Our Price: $8.50
Remote Switch RH E-Z Track HO
Description:
Shipping cost will vary by dimensions or weight please call or email for shipping quotes.
This is an HO Scale E-Z Track System Right Hand Remote Switch by Bachmann.
FEATURES: Switches cars from one track to another
Black plastic with steel alloy rails
Operates on floors, tables, and carpets
No screws, nails, or special tools needed for assembly
Snaps together and stays together
Quick, easy assembly
Includes red and green connecting wires and black plastic switch
Carded packaging
INCLUDES: One HO Scale E-Z Track System Right Hand Remote Switch
REQUIRES: HO Scale Train Equipment
Adult Supervision
SPECS: Scale: HO (1:87)
Length: 10-3/4" (273mm)
Width: 3-1/2" (88mm)
Height: 1/2" (13mm)
Our Price: $33.99
22 inch Radius Curved (HO Scale)
Description:
Nickel silver track with gray roadbed; 4/card
22” radius curved track is best used to make relatively wide railroad curves. This track accommodates longer locomotives and rolling stock, and permits mainline operation at higher speeds.
It can be placed on the outside of 18” radius curved E-Z Track® for double-track mainline realism.
Four pieces of track make up one-quarter (90 degrees) of a 44” diameter circle (a full circle is 360 degrees).
Also available in bulk.
Our Price: $18.50
N DUMMY KNUCKLE COUPLER
Description:
CLEARANCE ITEM
N SCALE DUMMY COUPLER RETAIL PRICE $2.19
Our Price: $1.00
HO GUAGE CP RAIL CABOOSE
Description:
CLEARANCE
COMPARE TO E-BAYS PRICE OF $2.07
OUR PRICE JUST $1.00
NEW OLD STOCK
Our Price: $1.00
- Page 3 of 4 | 48 Total Products