Central Hobbies 1401 Central Avenue Billings, MT 59102
We Gladly Accept:
as well as
ADHESIVES : WOOD GLUE
SIG-MENT 4oz MODEL AIRPLANE CEMENT Description:
This is a 4oz tube of Sig-Ment Model Airplane Cement.
SIG-MENT is a traditional solvent-based model cement that is fast drying and fuel proof.
An old-time favorite for all-around model construction.
Especially recommended for light-weight F/F models. Great for gluing ABS and some other plastics to balsa wood. Sands easily!
Our Price: $5.98
CEMENT FOR WOOD AND METAL 5/8oz TUBE Description:
This is the 5/8 ounce (18ml) Tube of Testors Cement For Metal and Wood Models.
FEATURES: Use for wood, cardboard and metal.
REQUIRES: Applying to both surfaces to be joined, allow to dry for a few seconds, press together, hold and allow two to four hours drying time for bonding metal, and twelve hours for bonding wood.
Our Price: $2.70
SIG SUPER-WELD 4oz LIQUID RESIN MODEL AIRPLANE GLUE Description:
This is a 4oz bottle of Sig Super-Weld Liquid Resin Model Airplane Glue.
Balsa to Framework assembly
Hardwood to Balsa
Hardwood to Hardwood
Our Price: $4.19
SIG-BOND 4oz MODEL AIRPLANE GLUE Description:
This is a 4oz bottle of Sig-Bond Model Airplane Glue.
SIG-BOND is an aliphatic resin model airplane glue that makes model building easy! It's the traditional general purpose wood glue that model builders have loved for years because it is so safe and easy to use.
Non-toxic. Cleans up with water.
This glue is super strong and will permanently bond all types of wood.
The joint will undoubtably be stronger than the wood itself!
Recommended for the assembly of all the wood parts of a model structure.
Air dries in 20-30 minutes and sands very well.
Completely dope and lacquer proof.
Sands smooth and clean, extra strong joints, fast drying dope and lacquer proof
General framework assembly
Balsa to balsa joints
Hardwood to balsa joints
Hardwood to hardwood joints
External planking seams
Our Price: $5.41
DELUXE MATERIALS SUPER 'PHATIC Description:
We love this glue for Dubro and Robart hinges. Also great for glueing carbon fiber rovings to foam and wood. The thin, non-fuming cyano alternative.
Low odor, water clean up. Penetrates much further than other glues. Provides better joints on balsa, ply, GRP, plastic hinges, foam and carbon fiber. 50 ml bottle
Some of the many uses:
Pin & glue balsa & hardwood.
Bonds plastic hinges.
Bonds carbon fibre & foam.
Famous “yellow” wood glue used in aeromodelling and professional applications where hard woods are used; dries crisper than PVA giving better sanding specially with balsawood.
Will not pull joints as it sets, resulting in better dimensional stability important for airframe construction.
Also sets at low temperatures and is water resistant making it ideal for model boats.
Use in miniature furniture making where its useful properties include:
• Taking a stain.
• Faster grab time.
It is designed specifically for the rapid construction of wood and card laser-cut kits.
The carefully designed bottle has a twist lock cap with fine dispensing needle applicator which is easily removed for cleaning. The low viscosity formula and needle applicator ensure easy application directly onto open or pre-assembled joints typically found in Laser cut kits. Benefits therefore are:
Anti-clog in action
Easily cleaned with water.
Safe and odourless.
Able to bonds plastics & painted wood
This is not a CA type glue. Works great for assembling wood airplane modes.