A specially formulated solvent cement for fast, permanent bonding of most similar plastics, including Styrene. Quickly bonds ABS to ABS, Styrene to Styrene, Butyrate to Butyrate and Acrylic to Acrylic. Actually melts the surfaces together, creating a bond as strong as the surrounding areas. Full coverage attained by capillary action. Comes with applicator brush in cap. 2 ounce bottle.
***** WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. (Just like breathng in CA.)
Our Price: $5.69
Micro Kristal Klear - 1 oz. Description:
If there was ever a modeler’s secret, this is it. Micro Kristal Klear can do so many things that can make a big difference in the appearance of your models. First, Micro Kristal Klear is a liquid that can be used to form very real looking small windows up to about 1/4 in size. It is also an adhesive for mounting clear plastic parts, windows, etc. on models.
Our Price: $5.00
JM HOBBY SUPPLY Styrene Tack*It II 1 oz jar Description:
The same TENAX 7R adhesive, reverse engineered from the original formula, under a new name.
Using it with Styrene models still allows a fast bond time of 3-5 seconds
Now you can use it on Acrylic models too! Curing time is about 10 seconds!
You can increase working time by mixing it with up to 50% Xylene to slow the bond time. (Xylene is available at many hardware and paint stores.)
If you glue a part incorrectly, STYRENE TACK-IT II can be used as a solvent to loosen the part and it will come apart without all of the stringy mess that the old Tenax 7R woud create. Reapply STICK-IT II to reattach the part!
Lasts Indefinately with cap on tight! (JM Hobby Supply stores them upside down for a tight seal.)
An applicator specially designed for the precise control of liquid solvent plastic adhesives such as Plastic Magic. When even a brush can sometimes deliver too much this breakthrough device will deliver just the right amount of adhesive to bond the most intricate parts.
Prevents glue runs.
Creates invisible joints especially on clear plastic.
A very fast, plastic cement for all types of plastic kits. The clog-resistant formula and fine tip bottle make for great ease of use.
Bonds: styrene, clear plastic, and even wood to plastic.
Our Price: $3.99
PLASTIC-CURE CA 1/2 oz bottle with brush Description:
Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood, but its brush applicator at times will not be the best way to apply it.
Will Not Fog most clear plastics making it great for installing widows in models.
Plastic-Cure is superior for the application of false nails and wraps on fingernails, where its brush is the preferred method of application.
Our Price: $6.75
TAMIYA Extra-Thin Cement (Not Fast Set) Description:
Tamiya EXTRA THIN model cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.