|
Katana MD Features
The new MD redefines the word quality. The
construction, the hardware and the level of finish detail is
second to none. The wings are matched individually to each
fuselage just like is done on giant scale and the model is 99%
built for you in the factory.
Wings and ailerons are pre hinged and sealed!
Carbon anti rotation pins are pre glued
The pre-cut fiberglass cowling is reinforced with carbon fiber.
Its aerodynamic design allows air to flow in and cool the motor,
battery and ESC for maximum efficiency. Two air scoops are also
included in the kit to direct the motor box air flow under the
hood.
The tinted canopy/hatch is one unit assembled at the factory for
you and attached to the model with very strong magnets making
easy change of batteries at the field.
Carbon landing gear is pre drilled and blind nuts are
pre-installed in the fuselage.
The motor box is assembled at the factory with the correct thrust
line already built in.
The composite firewall is pre-drilled ready for outrunner
installation.
Wheel pants are pre cut and optional carbon wheel pants are
available.
Red metallic color scheme with carbon fiber trim.
Top quality hardware kit included, including CF double servo
arms and Kevlar pull pull system.
Free deflection gauge and wing bolts spanner are included with
each kit!
The brief assembly is a joy and most modelers will have it set
up in one evening. |
|
Specifications
Wing span: 1170mm/ 46 in
Length :1140mm/ 44.9in
Weight : Approx 965g 34oz
Wing Area: 500 sq.in
Wing Loading: Approx 9.77oz/sq.ft
Motor: Torque 2818/900
Servos: 4 Micro servos like HS-65 |
 |
|
