|
|
|
|
 |
Du-Bro RC Double Sided Tape (3/PK)
Du-Bro's double sided tape assortment comes in 3
different thicknesses: 1/32 (0.7mm), 1/16 (1.5mm), 1/8 (3mm). Each
size is die cut with four 1 (25mm) x 3 (76mm) pieces. (12 square
inches) Works great for mounting servos, receivers, speed controls,
etc. |
| Du-Bro
RC Double Sided Tape (3/PK) |
|
|
|
| |
|
|
 |
Du-Bro RC Mini E/Z Connector (2/PK)
Ideal for Park Flyers! Lightweight aluminum design (0.25g)
allows for up to .047 wire. 2-56 machine screw securely locks wire
into place. Press fit our Mini E/Z Connector into a Mini Servo Arm
for a secure and dependable fit. 2/pkg. |
|
RC Mini E/Z
Connector (2/PK) |
|
|
|
| |
|
|
 |
RC Micro Pull-Pull System gives you precision
control! Complete with 4 Du-Bro Mini E/Z Connectors, 8 aluminum
crimps, 10 feet of 10lb. test no-stretch control line, & 4 micro
adjustment pins. The Micro Pull-Pull System weighs 2.2g. |
|
Du-Bro
RC Micro Pull-Pull System |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Push Rod System (2/PK)
Comes complete with (2) 20" .032 pushrods, (2) 18"
pushrod housings, (2) Micro E/Z Links (90 degree bend is already on
pushrods) and (2) Mini E/Z Connectors. Ideal for indoor and park
flyers. |
|
RC Micro Push Rod System
(2/PK) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Control Horns (2/PK)
Our new Micro Control Horn measures a 1/2" in height
and comes with a pin molded on the bottom flat for easy installation
and secure gluing. Pin can be trimmed off if not desired. Ideal for
indoor and park flyers. |
|
RC Micro Control Horns (2/PK) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro E/Z Link (4/PK)
Snap fit on .032 wire, simply bend 90 degree angle on
pushrod and install E/Z Link onto pushrod (No Z/Bend required).
Super lightweight design, ideal for indoor and park flyers. |
|
Du-Bro RC Micro E/Z Link
(4/PK) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Aileron System
Micro Aileron System designed for indoor and park
flyer aircraft. Complete with Micro E/Z Link (2), Micro E/Z
Connector (2), 1/32 (.032) push rods (2) with "L" bend wire (2), and
plastic bearing (2). The ideal set-up for installing ailerons on
your aircraft. |
|
Du-Bro RC Micro Aileron
System |
|
|
|
| |
|
|
 |
Du-Bro RC Micro 90° Bellcrank System
Mounts inside wing for use with ailerons and control
linkage systems. Bellcrank injection molded and comes complete with
mounting hardware. |
|
Micro 90 degree Bellcrank
System |
|
|
|
| |
|
|
 |
Du-Bro RC 30" Micro Push Rods (2/PK)
Comes complete with (2) 1/32" (.032) pushrods, (2)
pushrod housings, (2) Micro E/Z Links (90° bend is already on
pushrods) and (2) Mini E/Z Connectors. Ideal for Indoor and Park
Flyers. |
|
RC 30" Micro Push Rods (2/PK) |
|
|
|
| |
|
|
 |
Du-Bro RC Micro Tail Skid
Why scuff your tail all up when landing? Micro
Tail Skid comes with two pins molded on flat for easy installation
and secure gluing. Keeps the tail section of your plane from
dragging the ground. |
|
Du-Bro RC Micro Tail Skid |
|
|
|
| |
|
|
